Hello, I have a UPS unit attached to the "D-Link 320 ShareCenter", a SOHO 2-bay NAS. I set up the UPS in "Master Mode". Unfortunately it doesn't supply any kind of useful info in the web interface, so I had to connect via ‘nc' to port 3493 to get the proper UPS name.
I manage to to issue a successful ‘upsc’ command: root@galois:~# upsc megatec@192.168.3.6 battery.charge: 100 battery.voltage: 13.70 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.08 input.current.nominal: 2.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 224.4 input.voltage.fault: 224.4 input.voltage.nominal: 230 output.voltage: 224.4 ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 6 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665 Then I tried to setup upsmon.conf in order to monitor the UPS from my Linux host (hostname galois). The username and password are the ones I use to access the web interface. grep -v "#" /etc/nut/upsmon.conf |sort DEADTIME 15 FINALDELAY 5 HOSTSYNC 15 MINSUPPLIES 1 MONITOR megatec@192.168.3.6 1 admin <admin-pass> slave NOCOMMWARNTIME 300 POLLFREQ 5 POLLFREQALERT 5 POWERDOWNFLAG /etc/killpower RBWARNTIME 43200 SHUTDOWNCMD "/sbin/shutdown -h +0" When I start the service I get the following "ACCESS-DENIED" logs: root@galois:~# service ups-monitor start [ ok ] Starting NUT - power device monitor and shutdown controller: nut-client. root@galois:~# tail -n 2 /var/log/syslog Sep 23 19:12:03 galois upsmon[3997]: Startup successful Sep 23 19:12:03 galois upsmon[3999]: Login on UPS [megatec@192.168.3.6] failed - got [ERR ACCESS-DENIED] I didn't find any way to probe while issuing user and password. Any ideas on how to proceed? Is there any way to find username and password? Are there any defaults that I could try? The manual of the NAS and their website has no information on how to setup slaves and I’m at loss. Thanks, Best regards Panagiotis (atmosx) Atmatzidis email: a...@convalesco.org URL: http://www.convalesco.org GnuPG ID: 0x1A7BFEC5 gpg --keyserver pgp.mit.edu --recv-keys 1A7BFEC5 "Everyone thinks of changing the world, but no one thinks of changing himself.” - Leo Tolstoy
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
