On Friday 22 January 2016 21.35.16 Magnus Karlsson wrote:
Hi Magnus,
> Following the instructions a following site I can not get nut to work with
> my UPS.
>
OK.
> http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monito
> r-eaton-ups
>
> Hope that you can find out what is wrong by the provided info in the email
>
8<------------snip-----------------
> # lsusb -s 001:005 -v
>
> Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x06da Phoenixtec Power Co., Ltd
> idProduct 0x0002 UPS
> bcdDevice 1.00
> iManufacturer 4 Powerware
> iProduct 24 Powerware UPS
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
8<----------------snip-------------
Yes this is the first 5115 model that uses a type of serial over usb.
You need to use the bcmxcp_usb driver for this one.
Add bcmxcp_usb to your ups.conf and test.
> ************************************
> /etc/udev/rules.d/90-nut-ups.rules
>
> # Eaton 5115
> ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="06da",
> ATTR{idProduct}=="0002", MODE="0660", GROUP="nut"
> ************************************
>
>
> ************************************
> Issuing command
> root@laptux:~# upsdrvctl start
> Network UPS Tools - UPS driver controller 2.6.4
> Network UPS Tools - Generic HID driver 0.37 (2.6.4)
> USB communication driver 0.32
> This Liebert device (06da:0002) is not (or perhaps not yet) supported
> by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
> this does not fix the problem, try running the driver with the
> '-x productid=0002' option. Please report your results to the NUT user's
> mailing list <nut-upsuser@lists.alioth.debian.org>.
>
So it's not a hid ups.
Regards
Kjell Claesson
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
