Hello, we have a Emerson Liebert GXT4, that we like to connect to our servers to shut them down if there is a power failure (which happens quite often in our area).
I couldn't get the GXT4 working with usbhid-ups driver. So I need some advise to continue to get this device working. The GXT3 seems to be working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html). Here is my ups.conf [ups] driver = usbhid-ups port = usb-0000:00:1d.0-1.2/input0 desc = "Emerson Liebert GXT 4" My system is running Ubuntu 16.04 with nut version 2.7.2-4ubuntu1. This is what dmesg says: [26530.061874] usb 2-1.2: new full-speed USB device number 11 using ehci-pci [26530.156677] usb 2-1.2: New USB device found, idVendor=10af, idProduct=0000 [26530.156684] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [26530.156689] usb 2-1.2: Product: Liebert GXT4 [26530.156693] usb 2-1.2: Manufacturer: Emerson Network Power [26530.156696] usb 2-1.2: SerialNumber: 1607000058AFC23 [26530.174243] hid-generic 0003:10AF:0000.0008: hiddev0,hidraw2: USB HID v1.00 Device [Emerson Network Power Liebert GXT4] When I want to start the driver with "upsdrvctl start" it outputs: Network UPS Tools - UPS driver controller 2.7.2 Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 This Liebert device (10af:0000) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the driver with the '-x productid=0000' option. Please report your results to the NUT user's mailing list <nut-upsuser@lists.alioth.debian.org>. I've attachted the output of the following commands. * lsusb -v * /lib/nut/usbhid-ups -DDDD -x productid=0000 -a ups What can I do to get this UPS working? Best Regards, Zefanjas
logs.tar.gz
Description: application/gzip
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
