On 07/06/2017 02:18 AM, Charles Lepple wrote:
On Jul 5, 2017, at 5:34 PM, Ambrogio Coletti <ambroj...@gmail.com
<mailto:ambroj...@gmail.com>> wrote:
From section 4.23 of the Developer Guide:
"There are a few USB UPS devices that are not HID devices. These
devices typically implement some version of the manufacturer’s
serial protocol over USB (which is a really dumb idea, by the way).
An example is the Tripplite USB. Such devices are not supported by
the usbhid-ups driver, and are not covered in this document."
I guess that applies to me?
No, but my original comment does:
"The Protocol 1330 support was added after 2.7.4 was released. You
might be able to use a 2.7.4 tarball with "productid = 1330" in
ups.conf, but voltages might be off by a factor of 10. *You will also
need to adjust the udev files manually to fix /dev/bus/usb permissions.*"
Manuel: did you happen to regenerate the udev files, or use one of the
Buildbot tarballs? We typically don't bother to do that until "make
dist" before a release (since the rules files are generated from *.in
files based on configure parameters), so your package might still have
the rules file from 2.7.4 (which does not include protocol 1330).
yes, the package installed by Mr. Coletti includes the new rules:
# TrippLite
[...]
# e.g. TrippLite ECO550UPS - usbhid-ups
ATTR{idVendor}=="09ae", ATTR{idProduct}=="1010", MODE="664", GROUP="dialout"
# e.g. TrippLite SU3000LCD2UHV - usbhid-ups
ATTR{idVendor}=="09ae", ATTR{idProduct}=="1330", MODE="664", GROUP="dialout"
# e.g. TrippLite OMNI1000LCD - usbhid-ups
ATTR{idVendor}=="09ae", ATTR{idProduct}=="2005", MODE="664", GROUP="dialout"
[...]
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
