Yes, this was the issue. Thanks to Srini and Ulf for your input on this. -Reid
Here is what we changed fstab to and now it works: /dev/mapper/mpath0 /u02 ocfs2 datavolume,nointr,_netdev,noatime 0 0 /dev/mapper/mpath1 /u03 ocfs2 datavolume,nointr,_netdev 0 0 ________________________________ From: Ulf Zimmermann [mailto:u...@openlane.com] Sent: Thursday, August 06, 2009 8:37 PM To: McKinley, Reid; Srinivas Eeda Cc: ocfs2-users@oss.oracle.com Subject: RE: [Ocfs2-users] OCFS2 mount points not automatically mountingonserver reboot Isn't your problem that you are setting the filesystem type to "ocfs2_oracw" and "ocfs2_oragrid" ? Unless this has changed after 1.2.9, it should be "ocfs2". From: ocfs2-users-boun...@oss.oracle.com [mailto:ocfs2-users-boun...@oss.oracle.com] On Behalf Of McKinley, Reid Sent: Thursday, August 06, 2009 12:07 PM To: McKinley, Reid; Srinivas Eeda Cc: ocfs2-users@oss.oracle.com Subject: Re: [Ocfs2-users] OCFS2 mount points not automatically mounting onserver reboot I should mention that the OCFS2 mount points mount fine when the manual mount is done after the reboot. Cmds for manual mounting: mount -o datavolume,nointr,_netdev,noatime -t ocfs2 /dev/mapper/mpath0 /u02 mount -o datavolume,nointr,_netdev,noatime -t ocfs2 /dev/mapper/mpath1 /u03 They just do not auto mount when rebooting. /etc/fstab entries look like this: /dev/mapper/mpath0 /u02 ocfs2_oracw datavolume,nointr,_netdev 0 0 /dev/mapper/mpath1 /u03 ocfs2_oragrid datavolume,nointr,_netdev 0 0 ________________________________ From: ocfs2-users-boun...@oss.oracle.com [mailto:ocfs2-users-boun...@oss.oracle.com] On Behalf Of McKinley, Reid Sent: Thursday, August 06, 2009 2:47 PM To: Srinivas Eeda Cc: ocfs2-users@oss.oracle.com Subject: Re: [Ocfs2-users] OCFS2 mount points not automatically mounting onserver reboot Thanks, Srini. We cannot locate any other applicable msgs in the dmesg for this. Here is a portion. SCSI device sds: drive cache: write back sds: unknown partition table SCSI device sdt: 57688320 512-byte hdwr sectors (29536 MB) sdt: Write Protect is off sdt: Mode Sense: 6b 00 00 08 SCSI device sdt: drive cache: write back sdt: unknown partition table SCSI device sdu: 57688320 512-byte hdwr sectors (29536 MB) sdu: Write Protect is off sdu: Mode Sense: 6b 00 00 08 SCSI device sdu: drive cache: write back sdu: unknown partition table SCSI device sdv: 57688320 512-byte hdwr sectors (29536 MB) sdv: Write Protect is off sdv: Mode Sense: 6b 00 00 08 SCSI device sdv: drive cache: write back sdv: unknown partition table SCSI device sdw: 57688320 512-byte hdwr sectors (29536 MB) sdw: Write Protect is off sdw: Mode Sense: 6b 00 00 08 SCSI device sdw: drive cache: write back sdw: unknown partition table SCSI device sdx: 57688320 512-byte hdwr sectors (29536 MB) sdx: Write Protect is off sdx: Mode Sense: 6b 00 00 08 SCSI device sdx: drive cache: write back sdx: unknown partition table Hangcheck: starting hangcheck timer 0.9.0 (tick is 1 seconds, margin is 10 seconds). Hangcheck: Using monotonic_clock(). Here is the additional info. [r...@servername01 rc6.d]# ls K02avahi-daemon K20oracleasm K74ntpd K89netplugd K02avahi-dnsconfd K25sshd K75netfs K89rdisc K02haldaemon K30sendmail K80kdump K90network K03rhnsd K35smb K85mdmonitor K92ip6tables K03yum-updatesd K35winbind K85mdmpd K92iptables K05atd K50netconsole K85messagebus K95kudzu K05saslauthd K50snmpd K85rpcgssd K96init.crs K10cups K50snmptrapd K85rpcidmapd K97sysstat K10psacct K50xinetd K86nfslock K99lvm2-monitor K10Tivoli_lcf1 K60crond K87irqbalance K99microcode_ctl K10xfs K69rpcsvcgssd K87mcstrans S00killall K15httpd K72autofs K87multipathd S01reboot K19ocfs2 K73ypbind K87portmap K20nfs K74lm_sensors K87restorecond K20o2cb K74nscd K88syslog [r...@chastoemgc01 rc6.d]# ________________________________ From: Srinivas Eeda [mailto:srinivas.e...@oracle.com] Sent: Thursday, August 06, 2009 1:52 PM To: McKinley, Reid Cc: ocfs2-users@oss.oracle.com Subject: Re: [Ocfs2-users] OCFS2 mount points not automatically mounting on server reboot Reid, that error about stackglue module is harmless and can be ignored. Are you seeing any other errors associated with mounts failing in dmesg? Is the storage up by then? Can you list ls /etc/rc<runlevel>.d/ thanks, --Srini McKinley, Reid wrote: Our ocfs2 mount points will not mount on server reboot. This is a critical issue because we are storing the Oracle Clusterware OCR and Voting files on a OCFS2 mount point. We receive this error in the system log: modprobe: FATAL: Module ocfs2_stackglue not found. /etc/fstab entries look like this: /dev/mapper/mpath0 /u02 ocfs2_oracw datavolume,nointr,_netdev 0 0 /dev/mapper/mpath1 /u03 ocfs2_oragrid datavolume,nointr,_netdev 0 0 We are using the following config: [r...@servername02 ~]# uname -r 2.6.18-92.el5 [r...@servername02 ~]# rpm -qa|grep -i ocfs2 ocfs2-tools-devel-1.4.2-1.el5 ocfs2-2.6.18-92.el5-1.4.2-1.el5 ocfs2-tools-1.4.2-1.el5 ocfs2console-1.4.2-1.el5 We have the ocfs and oc2b services configured to restart: [r...@servername02 ~]# chkconfig --list |grep ocfs ocfs2 0:off 1:off 2:on 3:on 4:on 5:on 6:off [r...@servername02 ~]# chkconfig --list |grep o2cb o2cb 0:off 1:off 2:on 3:on 4:on 5:on 6:off Any help is greatly appreciated. Thanks, Reid M. ************************************************************************ ******************** This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, please contact the sender immediately by reply e-mail and destroy all copies. You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. TIAA-CREF ************************************************************************ ******************** ________________________________ _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users ************************************************************************ ******************** This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, please contact the sender immediately by reply e-mail and destroy all copies. You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. TIAA-CREF ************************************************************************ ******************** ************************************************************************ ******************** This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, please contact the sender immediately by reply e-mail and destroy all copies. You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. TIAA-CREF ************************************************************************ ******************** ******************************************************************************************** This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, please contact the sender immediately by reply e-mail and destroy all copies. You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. TIAA-CREF ********************************************************************************************
_______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users