Are you sure you have ocfs2-tools-1.6.3? I remember we had an
issue with this with an earlier release... 1.6.1/.2.
On 10/23/2011 10:43 AM, Laurentiu Gosu wrote:
hmm..
#ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D
0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs
*BUT:*
#ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2
ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat
I can still kill the ref using device name (-d).
On 10/23/2011 17:57, Sunil Mushran wrote:
I think it stops by uuid. So try doing this the next time.
You are encountering some issue that we have not seen before.
ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2
On 10/23/2011 05:32 AM, Laurentiu Gosu wrote:
Hi Sunil,
Sorry for my late reply, i just had time today to start from scratch
and test.
I rebuilt my environment(2 nodes connected to a SAN via
iSCSI+multipath). I still have the issue that the heartbeat is
active after I umount my ocfs2 volume.
/etc/init.d/o2cb stop
Stopping O2CB cluster CLUST: Failed
Unable to stop cluster as heartbeat region still active
ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0
0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs
After i manually kill the ref (ocfs2_hb_ctl -K -d
/dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can
live with that but why doesn't it stop automatically? As i
understand, hearbeat should be started and stopped once the volume
gets mounted/umounted.
br,
Laurentiu.
On 10/19/2011 02:28, Sunil Mushran wrote:
Manual delete will only work if there are no references. In your case
there are references.
You may want to start both nodes from scratch. Do not start/stop
heartbeat manually. Also, do not force-format.
On 10/18/2011 03:54 PM, Laurentiu Gosu wrote:
OK, i rebooted one of the nodes(both had similar issues); . But
something is still fishy.
- i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/
- i unmount it: umount /mnt/tmp/
- tried to stop o2cb: /etc/init.d/o2cb stop
Stopping O2CB cluster CLUSTER: Failed
Unable to stop cluster as heartbeat region still active
- ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D
0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs
- ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D
ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat
- ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/
/sys/kernel/config/cluster/CLUSTER/heartbeat/:
total 0
drwxr-xr-x 2 root root 0 Oct 19 01:50
0C4AB55FE9314FA5A9F81652FDB9B22D
-rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold
/sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D:
total 0
-rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes
-rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks
-rw-r--r-- 1 root root 4096 Oct 19 01:50 dev
-r--r--r-- 1 root root 4096 Oct 19 01:50 pid
-rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block
- i cannot manually delete
/sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/
PS: i'm going to sleep now, i have to be up in a few hours. We can
continue tomorrow if it's ok with you.
Thank you for your help.
Laurentiu.
On 10/19/2011 01:33, Sunil Mushran wrote:
One way this can happen is if one starts the hb manually and then
force
formats on that volume. The format will generate a new uuid. Once
that
happens, the hb tool cannot map the region to the device and thus
fail
to stop it. Right now the easiest option on this box is resetting it.
On 10/18/2011 03:24 PM, Laurentiu Gosu wrote:
Yes, i did reformat it(even more than once i think, last week).
This is a pre-production system and i'm trying various options
before moving into real life.
On 10/19/2011 01:19, Sunil Mushran wrote:
Did you reformat the volume recently? or, when did you format last?
On 10/18/2011 03:13 PM, Laurentiu Gosu wrote:
well..this is weird
ls /sys/kernel/config/cluster/CLUSTER/heartbeat/
*918673F06F8F4ED188DDCE14F39945F6* dead_threshold
looks like we have different UUIDs. Where is this coming from??
ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6
918673F06F8F4ED188DDCE14F39945F6: 1 refs
On 10/19/2011 01:04, Sunil Mushran wrote:
Let's do it by hand.
rm -rf
/sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D
*
On 10/18/2011 02:52 PM, Laurentiu Gosu wrote:
ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D
ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping
heartbeat
No improvment :(
On 10/19/2011 00:50, Sunil Mushran wrote:
See if this cleans it up.
ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D
On 10/18/2011 02:44 PM, Laurentiu Gosu wrote:
ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D
0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs
On 10/19/2011 00:43, Sunil Mushran wrote:
ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D
On 10/18/2011 02:40 PM, Laurentiu Gosu wrote:
mounted.ocfs2 -d
Device FS Stack
UUID Label
/dev/mapper/volgr1-lvol0 ocfs2 o2cb
0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2
mounted.ocfs2 -f
Device FS Nodes
/dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001
ro02xsrv001 = the other node in the cluster.
By the way, there is no /dev/md-2
ls /dev/dm-*
/dev/dm-0 /dev/dm-1
On 10/19/2011 00:37, Sunil Mushran wrote:
So it is not mounted. But we still have a hb thread
because
hb could not be stopped during umount. The reason for that
could be the same that causes ocfs2_hb_ctl to fail.
Do:
mounted.ocfs2 -d
On 10/18/2011 02:32 PM, Laurentiu Gosu wrote:
ls -lR /sys/kernel/debug/ocfs2
/sys/kernel/debug/ocfs2:
total 0
ls -lR /sys/kernel/debug/o2dlm
/sys/kernel/debug/o2dlm:
total 0
ocfs2_hb_ctl -I -d /dev/dm-2
ocfs2_hb_ctl: Device name specified was not found
while reading uuid
There is no /dev/dm-2 mounted.
On 10/19/2011 00:27, Sunil Mushran wrote:
mount -t debugfs debugfs /sys/kernel/debug
Then list that dir.
Also, do:
ocfs2_hb_ctl -l -d /dev/dm-2
Be careful before killing. We want to be sure that
dev is not mounted.
On 10/18/2011 02:23 PM, Laurentiu Gosu wrote:
Again the outputs:
cat
/sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev
dm-2
--->here should be volgr1-lvol0 i guess?
ls -lR /sys/kernel/debug/ocfs2
ls: /sys/kernel/debug/ocfs2: No such file or directory
ls -lR /sys/kernel/debug/o2dlm
ls: /sys/kernel/debug/o2dlm: No such file or directory
I think i have to enable debug first somehow..?
Laurentiu.
On 10/19/2011 00:17, Sunil Mushran wrote:
What does this return?
cat
/sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev
Also, do:
ls -lR /sys/kernel/debug/ocfs2
ls -lR /sys/kernel/debug/o2dlm
On 10/18/2011 02:14 PM, Laurentiu Gosu wrote:
Here is the output:
ls -lR /sys/kernel/config/cluster
/sys/kernel/config/cluster:
total 0
drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER
/sys/kernel/config/cluster/CLUSTER:
total 0
-rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method
drwxr-xr-x 3 root root 0 Oct 19 00:12 heartbeat
-rw-r--r-- 1 root root 4096 Oct 19 00:12
idle_timeout_ms
-rw-r--r-- 1 root root 4096 Oct 19 00:12
keepalive_delay_ms
drwxr-xr-x 4 root root 0 Oct 11 20:23 node
-rw-r--r-- 1 root root 4096 Oct 19 00:12
reconnect_delay_ms
/sys/kernel/config/cluster/CLUSTER/heartbeat:
total 0
drwxr-xr-x 2 root root 0 Oct 19 00:12
918673F06F8F4ED188DDCE14F39945F6
-rw-r--r-- 1 root root 4096 Oct 19 00:12
dead_threshold
/sys/kernel/config/cluster/CLUSTER/heartbeat/*918673F06F8F4ED188DDCE14F39945F6*:
total 0
-rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes
-rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks
-rw-r--r-- 1 root root 4096 Oct 19 00:12 dev
-r--r--r-- 1 root root 4096 Oct 19 00:12 pid
-rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block
/sys/kernel/config/cluster/CLUSTER/node:
total 0
drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001
drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002
/sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001:
total 0
-rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address
-rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port
-rw-r--r-- 1 root root 4096 Oct 19 00:12 local
-rw-r--r-- 1 root root 4096 Oct 19 00:12 num
/sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002:
total 0
-rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address
-rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port
-rw-r--r-- 1 root root 4096 Oct 19 00:12 local
-rw-r--r-- 1 root root 4096 Oct 19 00:12 num
On 10/19/2011 00:12, Sunil Mushran wrote:
ls -lR /sys/kernel/config/cluster
What does this return?
On 10/18/2011 02:05 PM, Laurentiu Gosu wrote:
Hi,
I have a 2 nodes ocfs2 cluster running UEK
2.6.32-100.0.19.el5,
ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5.
My problem is that all the time when i try to
run /etc/init.d/o2cb stop
it fails with this error:
Stopping O2CB cluster CLUSTER: Failed
Unable to stop cluster as heartbeat region
still active
There is no active mount point. I tried to
manually stop the heartdbeat
with "ocfs2_hb_ctl -K -d
/dev/mapper/volgr1-lvol0 ocfs2" (after finding
the refs number with "ocfs2_hb_ctl -I -d
/dev/mapper/volgr1-lvol0 ").
But even if refs number is set to zero the
"heartbeat region still
active" occurs.
How can i fix this?
Thank you in advance.
Laurentiu.
_______________________________________________
Ocfs2-users mailing list
Ocfs2-users@oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs2-users
_______________________________________________
Ocfs2-users mailing list
Ocfs2-users@oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs2-users
