Hello
On octave-3.2.4 distributed on SourcgeForge octcdf octave-forge package can be
installed when it is selected at install.
Note that Octcdf is not auto loaded due to the reason described in
KNON_ISSUES.txt in the package (You can access it from start menu).
*******************
*) The command "clear all" results in a segfault.
This is currently triggered by the following octave-forge packages:
windows
octcdf
communications
ga (depends on communications)
The error occurs only if any of these packages is marked "-auto"
i.e. is loaded at startup.
*******************
>> pkg load octcdf
will activate octcdf command.
Regards
Tatsuro
--- On Mon, 2011/8/29, Dov Krugerwrote:
> The binary package available for windows is 3.2.4. I tried to installed
> octcdf, but it didn't work. Reading the docs on wikipedia indicates that
> octcdf only works on octave 3.4 or better. This leads to the question: why
> provide a package if it won't work with the binary version?
>
> Is there some way to make it work with the binary installer, or do I have to
> build from source? I do have cygwin installed, but I wanted to build a
> standalone binary that works like the binary.
>
>
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Octave-dev mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/octave-dev