Hi all, 2010/11/10 Gu, Yang <[email protected]>: >>According to your tip , I tried to set "HideCallerId" to "default", >>"disabled" and >>"enabled", and I can verify by run list-modem script that "HideCallerId" had >>been >>modified . but I still could find phone number on both called party and >>calling party , >>regardless the value of "HideCallerId" is what. >> >>How can I let phone number be withheld on incoming at called party , when I >>make a >>voice call. > > I think the reason is your operator doesn't provide this supplementary > service. Below is my log when enable the "HideCallerId". I couldn't enable > this feature either. > > ofonod[17734]: PCUI: > AT+CLIR=1\r > ofonod[17734]: PCUI: < \r\nOK\r\n > ofonod[17734]: PCUI: > AT+CLIR?\r > ofonod[17734]: PCUI: < \r\n+CLIR: 1,0\r\n\r\nOK\r\n > ofonod[17734]: drivers/atmodem/call-settings.c:clir_query_cb() clir_query_cb: > override: 1, network: 0
What happens when you make a call? Does call get rejected or do you get some CSSU indications? Yang and Haitao, please set HideCallerId to "disabled", try to make call, then set HideCallerId to "enabled", try to make a call, and perhaps also try to make call with test/dial-number number enabled and test/dial-number disabled and then post the results. -- Pekka.Pessi mail at nokia.com _______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
