Hi Leonardo, On 05/31/2011 12:45 PM, Leonardo Luiz Padovani da Mata wrote: > Hello Denis, how are you? > > On Tue, May 31, 2011 at 1:47 PM, Denis Kenzior <denk...@gmail.com > <mailto:denk...@gmail.com>> wrote: > > Hi Leonardo, > > On 05/30/2011 04:11 PM, Leonardo Luiz Padovani da Mata wrote: > > hello dudes, what i need to do to check if the implemented drivers are > > enough to support a modem? Do i just need to add the rules for > udev? how > > do i do that? > > > > The id of the modem is 12d1:1c0b huawei e173 > > > > Check plugins/ofono.rules in git. It looks like a rule is not present > for this particular device id. > > You will have to do some minor poking around to figure out what tty > corresponds to what function (e.g. Pcui, Modem, see other Huawei rules > for examples), add a new entry to ofono.rules and try to see if it > works. > > > Ok, i've found another possible soluttion using usb_modeswitch, but it > didn't work yet: > http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=552 > > Do you think that the usb_modeswitch approach is better/worse?
This depends a little bit on how your modem is being recognized. If it is recognized as a storage device, then yes, usb_modeswitch will probably be required. If it is already recognized as a modem and the rules are not present in ofono.rules, then you will need to perform the steps I mentioned in my previous mail. Regards, -Denis _______________________________________________ ofono mailing list ofono@ofono.org http://lists.ofono.org/listinfo/ofono
