Hi Marcel, I saw that you add an oFono.rules to support E398 Huawei modem. And for this modem, you are using interface 0 for Modem and 1 for Pcui. This mode has a VID/PID after switch 12d1:1506.
But I have a Huawei E367, which also switch to 12d1:1506, but which is not using the same tty. The E3667 has five tty, but only ttyUSB0 and ttyUSB4 can send/recv AT command. Is your dongle also have a ttUSB4 that could be used? How can we handle such cases? Thanks, Bertrand. -- Bertrand Aygon Engineering Manager [email protected]<mailto:[email protected]> Open Source Technology Center, Intel Corporation --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
