> > > Hi!
> > >
> > > Not sure if I'm at the right place for these kinds of questions. Sorry if
> > > I'm not.
> > >
> > > I'm trying to automate test calls and I'm able to set up a call but not
> > > able to see incoming calls and reject or pick them up.
> > > I'm using a Raspberry Pi Zero 2 W with the newest raspbian 32bit lite.
> > > *apt list pi-bluetooth ofono pipewire python3-dbus*
> > > *Listing... Done*
> > > *ofono/stable,now 1.31-3 armhf [installed]*
> > > *pi-bluetooth/stable,now 0.1.19 all [installed]*
> > > *pipewire/stable,now 0.3.19-4 armhf [installed]*
> > > *python3-dbus/stable,now 1.2.16-5 armhf [installed]*
> > >
> > > *python /usr/share/ofono/scripts/monitor-ofono
> > > /hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF* shows this for an outgoing
> > > call:
> > >
> > > *{VoiceCallManager} [CallAdded]
> > > /hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF/voicecall01 { State = alerting,
> > > LineIdentification = +31622837451, Name = , Multiparty = False, RemoteHeld
> > > = False, RemoteMultiparty = False, Emergency = False }*
> > > *{VoiceCall} [/hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF/voicecall01] State
> > > = active*
> > > *{VoiceCall} [/hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF/voicecall01]
> > > StartTime = 2022-04-22T13:27:04+0100*
> > > *{VoiceCall} [/hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF/voicecall01]
> > > DisconnectReason remote*
> > > *{VoiceCall} [/hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF/voicecall01] State
> > > = disconnected*
> > > *{VoiceCallManager}
> > > [/hfp/org/bluez/hci0/dev_22_22_14_EC_29_BF/voicecall01]
> > > CallRemoved*
> > >
> > > but stays silent for incoming calls.
> >
> > ofono does not normally handle audio. What modem are you using?
> >
> > Best regards,
> > Pavel
> > --
> > People of Russia, stop Putin before his war on Ukraine escalates.
>
> Hi,
>
> The modem is a SED OPH-8108 connected via bluetooth, it is a GSM-R
> phone. Other modems connected via bluetooth don't have this problem.
>
> monitor-ofono shows outgoing calls and other messages but nothing for
> incoming calls for this particular modem.
>
> Any idea where I need to check why this modem doesn't show messages
> for incoming calls and can't pick up incoming calls with ofono?
> I checked with a bluetooth car kit and the car kit showed a incoming
> call and I could pick up so it can work.
>
> Since previous inquiry I struggled and finally succeeded to get ssh
> and audio over USB working (to windows) and had to remove pipewire for
> pulseaudio and found qdbus, basically:
> sudo apt-get update && sudo apt-get upgrade -y && sudo apt-get install
> pi-bluetooth ofono ofono-scripts pulseaudio-utils pulseaudio qdbus
> python3-dbus python3-pip -y
> Am not entirely sure if this was needed to get monitor-ofono to work
> on the other modems or if this was working all the time.
>
> BR,
> Jaco
Hi,
The modem has in-band ringtone enabled. It seems this causes the issues.
Can it be confirmed ofono does not handle incoming calls with in-band ringtone?
BR,
Jaco
_______________________________________________
ofono mailing list -- ofono@ofono.org
To unsubscribe send an email to ofono-le...@ofono.org
