I've obtained a Connect-X adapter (MT26428). I installed the IB drivers (based on 1440), and the installation appeared to go fine. It installed IB bus, the HCA bus driver, the virtual HCA driver, and IPoIB once for each port. From device manager, all devices show as working with no issues.
However. the ports on the HCAs do not show link up or active. The ports are connected to an SDR switch, but I get the same result directly connecting to another HCA or looping the HCA back to itself. I will try again with SVN rev 1421 to see if the changes since then are causing this issue, or if this is some sort of installation issue. I'm installing the drivers on Server 2003 using the PnP Found New Hardware Wizard. - Sean
_______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
