On Thu, Jul 01, 2021 at 06:27:55PM +0200, Carsten Grzemba via oi-dev wrote: > > I use the atge driver on my laptop with AR8151V2 chip. There I have the > problem if the cable disconnects 10 sec later I get a L1C error and as > a result it seems that the upper layer assumes that the link is up with > 10MB half duplex. [...] > But it seems there is very less similarity of the illumos driver with > the BSD or Linux driver. > > So I am wondering which source was the blue print for the Illumos atge > driver?
I started with the Freebsd alc driver, and wound up with a new version of the illumos atge driver. This was in 2010. Much has changed since then. At the time, I tested the AR8132 on my ASUS laptop. Masayuki Murayama tested the AR8131 on his laptop. This was my first driver. I had a great deal of help from other people. There was one report in 2012 of a driver failure with AR8151 v2.0 hardware. -- -Gary Mills- -refurb- -Winnipeg, Manitoba, Canada- _______________________________________________ oi-dev mailing list oi-dev@openindiana.org https://openindiana.org/mailman/listinfo/oi-dev