Hi my name is Tim and I am new to the group. Been lurking, alot of great information. Been working on a 51 five window that was a 3/4 ton. I put the cab on a 49 1/2 ton frame. Was running a 216 but have rebuilt a 62 235 bored .040 over ground the crank .010 and getting the head done. Found a local country neighbor who works out of a shop at home. Great machinist and very reasonable. Keeping the orginal look. Have done all the body work, replaced all the rusted panels sandblasted the frame and painted it. Going with a 12 generator in place of the 6v. Orginal beanch seat recovered. My question is this I recently was able to purshase a 3/4 ton frame with the axles and a decent cab. It has a complete GMC motor serial #6107323 or 8. This is a 53 248 the best I can figure out.Is this a full pressure oil motor? Not real familiar with GMC motors. It has a 4 speed behind it. The motor turns over. I was thinking of possibly using this motor in place of the 235. Would my 3 speed bolt up to this bell housing or would I need to swap out the bell housing, fly wheel and preasure plate. I purshased this parts truck for $100. Any ideal the value of this complete motor to inclued the air cleaner. Thanks
Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/