thanks Ken. I have a TCI chassis now so i will need to tack a bolt onto the 
frame rail to button that down

--- In old-chevy-truck@yahoogroups.com, Ken Wagner <whetstone.retreat@...> 
wrote:
>
> Mike, If I understand what you're asking my 52 3100 has a fender brace from 
> the rear fender opening which connects
> to the underside of the frame rail about 3" in front of the rear spring 
> hanger bracket. I will admit that my fenders are currently off for repair. 
> However the 3/8" hole I am referring to shows marking of something being 
> bolted to it.
> I hope this helps.
> Ken
> 
> 
> 
> ________________________________
>  From: Nate <vwnate1@...>
> To: old-chevy-truck@yahoogroups.com 
> Sent: Tuesday, July 24, 2012 2:10 PM
> Subject: [old-chevy-truck] Re: 1949 3100 rear fender fitment
>  
> 
>   
> 
> DANG ! .
> 
> _Finally_ a chance to show off my Farm Repaired fender brace (like many , it 
> broke but the welded repair was off) but I just sold my '49 3100 to a crook 
> named richard , basically the lower inner edge of each rear fender has one 
> 1/2" (IIRC) hole stamped in it and the round bracket leads in to the only 
> hole in the bed that'll line up....
> 
> If nothing lines up on the bed end , reverse the bracket 180° & try it again 
> .
> 
> Sorry , that's the best I can do .
> 
> -Nate
> Mike  wrote:
> >
> > Can someone post a picture of the placement of the rear strut/rod that goes 
> > from the rear fender edge to...? I didn't photograph that when I dismantled 
> > 7 years ago. ;-)
> >
> 
> 
>  
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

Ole Chevy and GMC trucks rule!

To unsubscribe, send an email (with no subject, no body, just the email), to:  
old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/old-chevy-truck/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/old-chevy-truck/join
    (Yahoo! ID required)

<*> To change settings via email:
    old-chevy-truck-dig...@yahoogroups.com 
    old-chevy-truck-fullfeatu...@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    old-chevy-truck-unsubscr...@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to