There's only one hydraulic cylinder per wheel , each one has it's own bleeder valve .
Id they're broken off , I'd scrap the cylinder , brandy new top quaLITY bENDIX OR wAGNER ONES ARE AVAILABLE FROM rOCK aUTO (damn caps lock) , NAPA and other fine FLAPS , some partshaus' sell crappy off brand cylinders you don't want as they're dangerous . Once in a blue moon you can use an " Easy - Out " to remove the broken off bleeder screw but that's rare ~ most of the time the Easy-Out snaps off too . If the cylinders are not leaking , you can hold them in place and use some .002" shim stock *gently* worked in past the rubber cups , bleed *very* gently else you'll blow the cups out of the cylinders while you have the drums off . -Nate Robert wrote : > > No, this is on a 1/2 ton 3100. > > > ________________________________ > From: "corvallis@..." <corvallis@...> > To: old-chevy-truck@yahoogroups.com > Sent: Sunday, July 28, 2013 4:54 PM > Subject: RE: [old-chevy-truck] adding brake bleeder valves > > > > Â > Is this a 2-ton? Each wheel cylinder should have a bleeder. If you don't see > one, they've been broken off. They rust in and won't turn. Bill in Oregon > > _____ > > From: old-chevy-truck@yahoogroups.com > [mailto:old-chevy-truck@yahoogroups.com] On Behalf Of Robert > Sent: Sunday, July 28, 2013 12:04 PM > To: old-chevy-truck@yahoogroups.com > Subject: [old-chevy-truck] adding brake bleeder valves > > Hi Yaull, > Is there a way to add bleeder valve to each wheel cylinder on old 51 Chevy > truck. I see a screw head at back of drums but no bleeder valves. > Thanks Robert > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed] > ------------------------------------ Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) <*> To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/