Well, I've changed the disk from a brand new one, just opened it up from a static bag inserted it, and the exact same error messages….
:S so two disks, no boot…. On 12.1.2014, at 14:54, Saso Kiselkov wrote: > On 1/12/14, 2:46 PM, Svavar Örn Eysteinsson wrote: >> Hello. >> >> I'm currently trying to install OmniOS on a brand new server. >> Using the latest OmniOS build on USB stick with a SuperMicro X10SAE >> motherboard, and a XEON CPU. >> >> When I have no SATA disk connected to the Intel SATA controller the >> installation boots up fine. >> >> As soon as I plug a disk into the controller, it gives me the following >> errors at boot : >> >> >> Probing for device nodes… >> Preparing image for use >> NOTICE : mount: not a UFS magic number (0x1c798c2e) >> NOTICE : mount: not a UFS magic number (0x1c798c2e) >> NOTICE : mount: not a UFS magic number (0x0) >> NOTICE : mount: not a UFS magic number (0x1c798c2e) >> Requesting System Maintenance Mode >> Console login services cannot run. >> >> Enter username for system maintenance…. >> >> >> My SATA disk is empty. >> >> Does anyone know what the hell is going on ? >> Are there any BOOT options on OmniOS installation? Can't find any >> information regarding boot options. >> >> Any help would be much appreciated. >> >> Thanks allot people. > > Can you try dd'ing over the disk with zeros and trying again? > > -- > Saso > > _______________________________________________ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss _______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss