Thank you! That did the trick. Next issue I have run into is that I
cannot get the OS to see the network. Followed the instructions here:
http://omnios.omniti.com/wiki.php/GeneralAdministration
Everything went through as stated in the instructions. My device is
e1000g0, route was added and IP/netmask/broadcast are all correct. But
no access to the network.
Any suggestions?
On 1/10/14, 4:56 PM, Michael Rasmussen wrote:
On Fri, 10 Jan 2014 13:57:31 -0700
CJ Keist <cj.ke...@colostate.edu> wrote:
Setup:
Memory: 4gb
Processors 4(1 socket, 4cores)[qemu64]
hard disk(ide0) format vmdk, cache=writethrough size=12gb
Network Device(net0) e1000 bridge=vmbr0
Omnios does not handle cores, only sockets. So do this instead:
Processors 4(4 socket, 1cores)[qemu64]
And for performance:
hard disk(sata0) format qcow2, cache=none size=12gb
_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
--
C. J. Keist Email: cj.ke...@colostate.edu
Systems Group Manager Solaris 10 OS (SAI)
Engineering Network Services Phone: 970-491-0630
College of Engineering, CSU Fax: 970-491-5569
Ft. Collins, CO 80523-1301
All I want is a chance to prove 'Money can't buy happiness'
_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
