Tjenare, Maybe its not possible, would explain why I cannot see the shared lun on the other system. I don't have any spare PCI-E slots on either, all filled with IODrives etc.
Br, Rune From: Johan Kragsterman [mailto:johan.kragster...@capvert.se] Sent: Sunday, November 02, 2014 11:24 PM To: Rune Tipsmark Cc: omnios-discuss@lists.omniti.com Subject: Ang: RE: RE: RE: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol Hej! Hmm, how about the target/initiiator configuration of the HCA's? When I think about it, I have never done this that you're trying: To use SRP both as target and initiator on the same system. I don't even know if it is possible. Since an HCA is entirely(with all ports) a target, you need to set one HCA as a target, and one HCA as an initiator. I've done it on fibre channel, but never on IB/SRP. Best regards from/Med vänliga hälsningar från Johan Kragsterman Capvert -----Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> skrev: ----- Till: Johan Kragsterman <johan.kragster...@capvert.se<mailto:johan.kragster...@capvert.se>> Från: Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> Datum: 2014-11-03 08:09 Kopia: "omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>" <omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>> Ärende: RE: RE: RE: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol connectX2 and drivers are loaded, both OmniOS servers have LUNs I can access from both ESX and Windows... just the conection between them that I cant figure out. Br, Rune From: Johan Kragsterman [mailto:johan.kragster...@capvert.se] Sent: Sunday, November 02, 2014 10:49 PM To: Rune Tipsmark Cc: omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com> Subject: Ang: RE: RE: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol Hej! I can see I forgot the list in previous mail... Anyway, are you using connectx adapters? Have you checked if the driver is loaded in the host system? Best regards from/Med vänliga hälsningar från Johan Kragsterman Capvert -----Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> skrev: ----- Till: Johan Kragsterman <johan.kragster...@capvert.se<mailto:johan.kragster...@capvert.se>> Från: Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> Datum: 2014-11-03 00:07 Ärende: RE: RE: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol It doesn't show up in stmfadm list-target.... only my other servers such as ESX and Windows show up... Subnet Manager is OpenSM running on the ESX hosts, has been working OK ever since I installed then, prior to that I had a couple of Cisco(Topspin) DDR Switches with inbuilt SM. Any other idea? All things I configured so far on both ZFS boxes,windows and esx has worked as expected... just this darn thing that's not doing what its supposed to... It should be enough to just add the HCA from ZFS10 onto the host-group on ZFS00 for ZFS10 to see a LUN on ZFS00 granted that there is a view configured on ZFS00 as well... or am I missing a step? Br Rune -----Original Message----- From: Johan Kragsterman [mailto:johan.kragster...@capvert.se] Sent: Sunday, November 02, 2014 11:58 AM To: Rune Tipsmark Subject: Ang: RE: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol -----Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> skrev: ----- Till: Johan Kragsterman <johan.kragster...@capvert.se<mailto:johan.kragster...@capvert.se>> Från: Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> Datum: 2014-11-02 20:05 Kopia: David Bomba <turbo...@gmail.com<mailto:turbo...@gmail.com>>, "omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>" <omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>> Ärende: RE: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol I know, but how do I initiate a session from ZFS10? If a session doesn't show up in "stmfadm list-targte -v", then you got something wrong in the IB fabric, if the view is right. Do you use a switch? Where do you have your IB Storage Manager? Br, Rune From: Johan Kragsterman [mailto:johan.kragster...@capvert.se] Sent: Sunday, November 02, 2014 10:33 AM To: Rune Tipsmark Cc: David Bomba; omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com> Subject: Ang: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol -----Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> skrev: ----- Till: Johan Kragsterman <johan.kragster...@capvert.se<mailto:johan.kragster...@capvert.se>> Från: Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> Datum: 2014-11-02 19:11 Kopia: David Bomba <turbo...@gmail.com<mailto:turbo...@gmail.com>>, "omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>" <omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>> Ärende: RE: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol Hi Johan Got two ZFS boxes (ZFS00 recv, ZFS10 send), both with IB and all configured and views made for vSphere which works just fine.. What I can't figure out is how to share a LUN with the other zfs box... see pasted info below... ZFS00: (the box I want to receive my zfs snapshot) The below are all ESX servers, cannot see the other ZFS box root@zfs00:/pool03# stmfadm list-target -v Target: eui.0002C90300095E7C Operational Status: Online Provider Name : srpt Alias : - Protocol : SRP Sessions : 8 Initiator: eui.0002C903000F397C Alias: 8102c90300095e7e:0002c903000f397c Logged in since: Sun Nov 2 02:09:41 2014 Initiator: eui.0002C903000F397B Alias: 8102c90300095e7d:0002c903000f397b Logged in since: Sun Nov 2 02:09:40 2014 Initiator: eui.0002C903000D3D04 Alias: 8102c90300095e7e:0002c903000d3d04 Logged in since: Sat Nov 1 21:14:47 2014 Initiator: eui.0002C90300104F47 Alias: 8102c90300095e7d:0002c90300104f47 Logged in since: Sat Nov 1 21:12:54 2014 Initiator: eui.0002C903000D3D03 Alias: 8102c90300095e7d:0002c903000d3d03 Logged in since: Sat Nov 1 21:12:32 2014 Initiator: eui.0002C90300104F48 Alias: 8102c90300095e7e:0002c90300104f48 Logged in since: Sat Nov 1 21:10:45 2014 Initiator: eui.0002C903000A48FA Alias: 8102c90300095e7e:0002c903000a48fa Logged in since: Sat Nov 1 21:10:40 2014 Initiator: eui.0002C903000D3CA0 Alias: 8102c90300095e7e:0002c903000d3ca0 Logged in since: Sat Nov 1 21:10:39 2014 Target: iqn.2010-09.org.napp-it:1394106801 Operational Status: Online Provider Name : iscsit Alias : 03.06.2014 Protocol : iSCSI Sessions : 0 root@zfs00:/pool03# stmfadm list-lu -v LU Name: 600144F007780B7F00005455EDD50002 Operational Status: Online Provider Name : sbd Alias : /pool03/LU11 View Entry Count : 1 Data File : /pool03/LU11 Meta File : not set Size : 2199023255552 Block Size : 512 Management URL : not set Vendor ID : SUN Product ID : COMSTAR Serial Num : not set Write Protect : Disabled Writeback Cache : Disabled Access State : Active root@zfs00:/pool03# stmfadm list-hg -v Host Group: ESX Host Group: Windows Host Group: ESX-iSER Host Group: OmniOS Member: eui.0002C903000923E6 <<--- The other ZFS box Member: iqn.2010-09.org.napp-it:1402013225 Member: iqn.1986-03.com.sun:01:58cfb38a32ff.5390f58d root@zfs00:/pool03# stmfadm list-view -l 600144F007780B7F00005455EDD50002 View Entry: 0 Host group : OmniOS Target group : All LUN : 0 ZFS10: (the sending box where I want to see the LUN from ZFS00) No disk show up from ZFS00... Hi! You got eui.0002C903000923E6 in host group OmniOS, but you don't have a session from that eui to the target. Rgrds Johan root@zfs10:/root# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c4t5000C50055FC9533d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50055fc9533 1. c4t5000C50055FE6A63d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50055fe6a63 2. c4t5000C500625B7EA7d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625b7ea7 3. c4t5000C500625B86E3d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625b86e3 4. c4t5000C500625B886Fd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625b886f 5. c4t5000C500625B8137d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625b8137 6. c4t5000C500625B8427d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625b8427 7. c4t5000C500625BB773d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625bb773 8. c4t5000C500625BC2C3d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625bc2c3 9. c4t5000C500625BD3EBd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500625bd3eb 10. c4t5000C50057085A6Bd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50057085a6b 11. c4t5000C50057086B67d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50057086b67 12. c4t5000C50062878C0Bd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50062878c0b 13. c4t5000C50062878C43d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50062878c43 14. c4t5000C500570858EFd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500570858ef 15. c4t5000C500570870D3d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c500570870d3 16. c4t5000C5005708351Bd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c5005708351b 17. c4t5000C5005708296Fd0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c5005708296f 18. c4t5000C50057089753d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50057089753 19. c4t5000C50057086307d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50057086307 20. c4t5000C50062879687d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50062879687 21. c4t5000C50062879707d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50062879707 22. c4t5000C50062879723d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50062879723 23. c4t5000C50062879787d0 <SEAGATE-ST4000NM0023-0004-3.64TB> /scsi_vhci/disk@g5000c50062879787 24. c7t0d0 <ATA-INTELSSDSC2BA10-0270 cyl 15571 alt 2 hd 224 sec 56> /pci@0,0/pci15d9,704@1f,2/disk@0,0 25. c7t1d0 <ATA-INTELSSDSC2BA10-0270 cyl 15571 alt 2 hd 224 sec 56> /pci@0,0/pci15d9,704@1f,2/disk@1,0 26. c7t4d0 <ATA-InnoLite SATADOM-19-14.91GB> /pci@0,0/pci15d9,704@1f,2/disk@4,0 27. c7t5d0 <ATA-InnoLite SATADOM-19-14.91GB> /pci@0,0/pci15d9,704@1f,2/disk@5,0 28. c10d0 <Unknown-Unknown-0001-149.00GB> /pci@0,0/pci8086,3c08@3/pci103c,178b@0 29. c11d0 <Unknown-Unknown-0001-149.00GB> /pci@0,0/pci8086,3c0a@3,2/pci103c,178b@0 30. c12d0 <Unknown-Unknown-0001-298.02GB> /pci@79,0/pci8086,3c04@2/pci10b5,8616@0/pci10b5,8616@5/pci103c,178e@0 31. c13d0 <Unknown-Unknown-0001-298.02GB> /pci@79,0/pci8086,3c04@2/pci10b5,8616@0/pci10b5,8616@6/pci103c,178e@0 32. c14d0 <Unknown-Unknown-0001-298.02GB> /pci@79,0/pci8086,3c08@3/pci10b5,8616@0/pci10b5,8616@5/pci103c,178e@0 33. c15d0 <Unknown-Unknown-0001-298.02GB> /pci@79,0/pci8086,3c08@3/pci10b5,8616@0/pci10b5,8616@6/pci103c,178e@0 Specify disk (enter its number): -----Original Message----- From: Johan Kragsterman [mailto:johan.kragster...@capvert.se] Sent: Sunday, November 02, 2014 9:56 AM To: Rune Tipsmark Cc: David Bomba; omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com> Subject: Ang: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol -----"OmniOS-discuss" <omnios-discuss-boun...@lists.omniti.com<mailto:omnios-discuss-boun...@lists.omniti.com>> skrev: ----- Till: David Bomba <turbo...@gmail.com<mailto:turbo...@gmail.com>> Från: Rune Tipsmark Sänt av: "OmniOS-discuss" Datum: 2014-11-02 07:55 Kopia: "omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>" <omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com>> Ärende: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol Sounds sensible, how do I do that? I tried creating a view for a thin lu with my other zfs box, but how do I detect it? First of all, if you run IB, forget the iscsi stuff, it's only creating un unnecessary IP layer that you don't need, and adds latency to your application. Did you create SRP target service using COMSTAR? # svcadm enable -r ibsrp/target What's the output of "srptadm list-target" ?(on storage box), or you can also use "stmfadm list-target -v" Do you got all necessary IB stuff, like a storage manager(OpenSM), in place? HCA ports shows up in dladm show-link? If so, your host system should discover it as a local disk, just with "format", if you have created a view with the right eui.xxxxxxxxxxxx for the initiator HCA. Rgrds Johan I also stumbled across something else interesting, wondering if its possible to set up two identical boxes and create a pool with local/remote disks as per this article http://www.ssec.wisc.edu/~scottn/Lustre_ZFS_notes/lustre_zfs_srp_mirror.html Br, Rune From: David Bomba [mailto:turbo...@gmail.com] Sent: Saturday, November 01, 2014 6:01 PM To: Rune Tipsmark Cc: omnios-discuss@lists.omniti.com<mailto:omnios-discuss@lists.omniti.com> Subject: Re: [OmniOS-discuss] zfs send via SRP or other RDMA enabled protocol I usually mount a iSer target and perform ZFS send to the target. This was the best way to exploit the rdma bandwidth to its full potential. On 2 Nov 2014, at 11:45 am, Rune Tipsmark <r...@steait.net<mailto:r...@steait.net>> wrote: Hi all, Is it possible to do zfs send/recv via SRP or some other RMDA enabled protocol? IPoIB is really slow, about 50 MB/sec between two boxes, no disks are more than 10-15% busy. If not, is there a way I can aggregate say 8 or 16 IPoIB partitions and push throughput to a more reasonable speed... Br, Rune _______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com<mailto:OmniOS-discuss@lists.omniti.com> http://lists.omniti.com/mailman/listinfo/omnios-discuss _______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com<mailto:OmniOS-discuss@lists.omniti.com> http://lists.omniti.com/mailman/listinfo/omnios-discuss
_______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
