Hi Johan,
Am 21.01.15 um 08:33 schrieb Johan Kragsterman:
Hi!
-----"OmniOS-discuss" <omnios-discuss-boun...@lists.omniti.com> skrev: -----
Till: <omnios-discuss@lists.omniti.com>
Från: Stephan Budach
Sänt av: "OmniOS-discuss"
Datum: 2015-01-20 23:21
Ärende: [OmniOS-discuss] How to use LSI's storcli?
Hi guys,
I am struggling to get storcli to work - well, not actually to work, but
to show me any of my 2907 HBAs, as storcli reports a number of 0
installed HBAs:
root@nfsvmpool02:/opt/MegaRAID/CLI# ./storcli show
Status Code = 0
Status = Success
Description = None
Number of Controllers = 0
Host Name = nfsvmpool02
Operating System = SunOS5.11
So, how do I make use of it?
Isn't the StorCLI a tool for megaraid controllers?
Well, I thought that the MRM supported both the plain HBAs and the RAID
ones. Interestingly, on my Linux boxe both, the storcli and the MegaCLI
seem to be the same binary. Plus, when installing the MRM package with
all it's bells and whistles, my *actually* 9207-8i do show up in the UI
and can be managed. I just checked the readme from the MRM software
package and it specifically notes support for the LSI SAS 9207-8i.
If your controller is an HBA, it is not a megaraid controller. By the way, did
you mean 9207-8i, when you wrote 2907-8i? LSISAS9207-8i is an HBA, and it is
NOT a MegaRaid controller, so I guess it shouldn't show up in the StorCLI.
Why would you need the StorCLI?
I wanted to check and probably update the FW on the 9207 from 15 to 18,
as I seem to encounter an issue with a specific bug in the FW of those
models.
Thanks,
budy
_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
