Hi Richard, Here are my settings:
OmniOS 5.11 omnios-a708424 April 2015 root@intra:/root# pkg list -a |grep locale|grep it locale/it 0.5.11-0.151014 i-- locale/it-extra 0.5.11-0.151014 i-- root@intra:/root# stty -a speed 38400 baud; rows 54; columns 190; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; dsusp = ^Y; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; status = ^T; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke root@intra:/root# kbd -lt USB keyboard type=6 layout=14 (0x0e) delay(ms)=500 rate(ms)=40 root@intra:/root# locale LANG= LC_CTYPE="C" LC_NUMERIC="C" LC_TIME="C" LC_COLLATE="C" LC_MONETARY="C" LC_MESSAGES="C" LC_ALL= root@intra:/root# cat /etc/default/init TZ="Europe/Rome" CMASK=022 The fact is that the abnormal behaviour I see (and I always seen) with vi editor happens both with the local USB Italian Keyboard (It's a Fujitsu Siemens Keyboard of 2006 that works perfectly with any Linux I used and I use) AND when I log in through SSH...so It appears not related to the physical keyboard but to a system setting. Thanks for you help! really much appreciated. Davide. On Thu, Apr 16, 2015 at 8:04 PM, Richard PALO <[email protected]> wrote: > Le 16/04/15 13:07, Davide Poletto a écrit : >> Hi Richard, >> >> echo $TERMINFO reports only a blank line on my system. >> >> Davide. >> > > Then you're probably on default. > I must admit I'm still on 151013... > > A few things to probably indicate... what is your actual keyboard? > > I will dig out my logitech usb keyboard to try, it does seem usb has issues. > using ps/2 right now and it's fine. > > Do you have all the locale files installed? (pkg list -a |grep locale|grep it) > for me I have: >> richard@omnis:/home/richard$ pkg list -a |grep locale|grep fr >> locale/fr 0.5.11-0.151013 i-- >> locale/fr-extra 0.5.11-0.151013 i-- > my locale is: >> LANG=fr_FR.UTF-8 >> LC_CTYPE="fr_FR.UTF-8" >> LC_NUMERIC="fr_FR.UTF-8" >> LC_TIME="fr_FR.UTF-8" >> LC_COLLATE="fr_FR.UTF-8" >> LC_MONETARY="fr_FR.UTF-8" >> LC_MESSAGES="fr_FR.UTF-8" >> LC_ALL= > > you may also wish to post your 'stty -a' output. > I have: >> speed 9600 baud; >> rows = 25; columns = 80; ypixels = 0; xpixels = 0; >> csdata ? >> eucw 1:0:0:0, scrw 1:0:0:0 >> intr = ^c; quit = ^\; erase = ^?; kill = ^u; >> eof = ^d; eol = <undef>; eol2 = <undef>; swtch = <undef>; >> start = ^q; stop = ^s; susp = ^z; dsusp = ^y; >> rprnt = ^r; flush = ^o; werase = ^w; lnext = ^v; >> status = ^t; >> -parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk -crtscts -crtsxoff -parext >> -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc >> ixon -ixany -ixoff imaxbel >> isig icanon -xcase echo echoe echok -echonl -noflsh >> -tostop echoctl -echoprt echoke -defecho -flusho -pendin iexten >> opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel tab3 > > I find deceiving to see that even though I use a ps/2 kbd, the following is my 'kbd -lt' >> USB keyboard >> type=6 >> layout=8 (0x08) >> delay(ms)=500 >> rate(ms)=40 > > there's certainly a reason though with the keyboard itself. I'll let you know when I get > my usb kbd located... > -- > Richard PALO >
_______________________________________________ OmniOS-discuss mailing list [email protected] http://lists.omniti.com/mailman/listinfo/omnios-discuss
