On Wed, Jun 10, 2015 at 4:09 AM, Robert A. Brock < robert.br...@2hoffshore.com> wrote:
> What did you use to flash them? Fwflash just gives an error about > firmware file being too large. > Santools. -Chip > > > *From:* Schweiss, Chip [mailto:c...@innovates.com] > *Sent:* 09 June 2015 21:25 > *To:* Robert A. Brock > *Cc:* omnios-discuss > *Subject:* Re: [OmniOS-discuss] Zpool export while resilvering? > > > > I went through this problem a while back. There are some gotchas in > getting them back online and firmware upgraded. The is will not talk to > the drive until it has its firmware upgraded or cleared from the fault > database. > > This drives will not flash with multipath enabled either. > > I ended up clearing the fault manager's database, disabling it and > disconnecting half the SAS cables to get them flashed. > > -Chip > > > > <snip> > 2H Offshore Engineering Ltd | Registered in England No. 02790139 | > Registered office: Ferryside, Ferry Road, Norwich NR1 1SW. > > > 2H Offshore is an Acteon company specializing in the design, monitoring > and integrity management of offshore riser and conductor systems. Acteon is > a group of specialist international engineering companies serving the > offshore oil and gas industry. Its focus is on subsea services spanning the > entire life of field. For more information, visit www.acteon.com > > > The information in and/or accompanying this email is intended for the > use of the stated recipient only and may be confidential and/or privileged. > It should not be forwarded or copied nor should its contents be disclosed > in any manner without the express consent of the sender/author. Any views > or opinions presented are solely those of the author and do not necessarily > represent those of 2H. >
_______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss