OK, reading the manual for the controller ... I do not found anything like "passthru"
What I did found was a fuction called "expose Hard Disk to Host" ... And, looks like is is what I need .... Coming back when I have the card in my hands ... Thanks again .... Fábio Rabelo 2016-03-03 12:31 GMT-03:00 Fábio Rabelo <fa...@fabiorabelo.wiki.br>: > OK .. > > So, I have to try it out at my own chance and risk ... > > Not today, but soon ... > > Thanks > > > Fábio Rabelo > > 2016-03-03 12:25 GMT-03:00 Dan McDonald <dan...@omniti.com>: > >> >> > On Mar 3, 2016, at 10:21 AM, Fábio Rabelo <fa...@fabiorabelo.wiki.br> >> wrote: >> > >> > >> > If 3108 are RAID, I still can configure my "tipical" RAID Z3 using >> each Hard Disk individualy ? >> > >> > Or OmniOS will only "see" the RAID array ? >> >> You'll have to use the MegaRAID BIOS crud to configure it to not HW-RAID >> the drives. Some of these let you have "passthru" which presents the raw >> SCSI device up to the OS. This is ideal. Older ones (e.g. 2108) would >> only let you create HW-RAID groups of one disk. This adds a layer of >> HW-RAID crap even though it's still a single drive. >> >> I know the 2208 would let you passthru. I've never tried a 3108 board, >> but I hope it's sane like the 2208. >> >> Dan >> >> >
_______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss