Hi Dan. Thanks for the reply. I disabled all the C-states and it's the same story.
If I boot from the SATA CD-ROM installation it hangs on boot right after : cpu7: Intel(r) Xeon(r) CPU E5520 @ 2.27Ghz cpu6: Intel(r) Xeon(r) CPU E5520 @ 2.27Ghz cpu7: initialization complete - online cpu6: initialization complete - online See here : https://dl.dropboxusercontent.com/u/16134/omnios_intel_cstates_disabled_boot.JPG If I boot from USB stick, with USB 2.0 enabled and or disabled the last message is always releated to usb stuff right after cpu6: initialization complete - online. So my BIOS configuration right now is : Intel QPI Frequency Select [Auto Max] Intel Turbo Boots Technology [Enabled] Enhanced Intel Speedstep Tech [Enabled] Processor C3 [Disabled] Processor C6 [Disabled] Intel Hyper-Threading Tech [Disabled] Core Multi-Processing [All] Execute Disable Bit [Disabled] Intel Virtualization Technology [Disasbled] Intel VT for Directed I/O [Disabled] and some more. My Bios Configuration can been seen here : https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios1.JPG https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios2.JPG https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios3.JPG https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios4.JPG Best regards, Svavar O > On 8. mar. 2016, at 15:13, Dan McDonald <dan...@omniti.com> wrote: > > >> On Mar 8, 2016, at 6:17 AM, Svavar Örn Eysteinsson <sva...@pipar-tbwa.is> >> wrote: >> >> Should I disable other CPU ? Should a enable C2, C3 state in BIOS or is that >> not relevant? > > Disable C-states, that's general illumos advice (regardless of distro). > > Dan > _______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
