Hey, I just plugged in the card and it was recognized:) It’s a LSI SAS3008 card. prtconf -d says: pci1000,30a0 (pciex1000,97) [LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3], instance #8
On the other hand, lspci says different: 15:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02) prtconf gives the right info. I run P12 IT firmware on it. Matej > On 24 May 2016, at 23:52, Richard Skelton <skelt...@btconnect.com> wrote: > > Hi Matej, > How did you get the mpt_sas driver to attach to your card ? > Looks like your device id is pci1000,30a0. > From prtconf -d I see for my SAS 9305-24i :- > pci1000,31a0 (pciex1000,c4) [LSI Logic / Symbios Logic SAS3224 > PCI-Express Fusion-MPT SAS-3] (driver not attached) > > lspci does not sow the card :-( > > Matej Žerovnik wrote: >> >> There is even an updated version of P20 that should eliminate the problems. >> I think the version number is 20.04.000 where the broken version was >> 20.02.000. I think I read about that on FreeNAS forum. >> >> As far as 12G goes, I’m about to run P12. I did some tests and so far no >> problems apart from FW upload tce invalid warning when I run sas3ircu list >> May 19 12:11:34 node scsi: [ID 107833 kern.warning] WARNING: >> /pci@74,0/pci8086,2f08@3/pci1000,30a0@0 (mpt_sas8): >> May 19 12:11:34 node FW Upload tce invalid! >> >> Matej >> >>> On 23 May 2016, at 22:23, Schweiss, Chip <c...@innovates.com >>> <mailto:c...@innovates.com>> wrote: >>> >>> >>> On Mon, May 23, 2016 at 3:18 PM, Dan McDonald <dan...@omniti.com >>> <mailto:dan...@omniti.com>> wrote: >>> >>> > On May 23, 2016, at 4:10 PM, Fábio Rabelo <fa...@fabiorabelo.wiki.br >>> > <mailto:fa...@fabiorabelo.wiki.br>> wrote: >>> > >>> > Hi to all ... >>> > >>> > You may need to flash the IT firmware : >>> > >>> > http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads >>> > >>> > <http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads> >>> >>> And if you do, make sure it's version 19 or lower. The IT firmware > 19 is >>> known to be flaky. Check the illumos list archives for details on why. >>> >>> That only on the 6G HBA. On the 12G HBA version 12 is the newest. I >>> haven't heard any preferred versions on these. I've been running v10 for >>> several months now without issue. >>> >>> -Chip >>> >>> >>> Dan >>> >>> _______________________________________________ >>> OmniOS-discuss mailing list >>> OmniOS-discuss@lists.omniti.com <mailto:OmniOS-discuss@lists.omniti.com> >>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>> <http://lists.omniti.com/mailman/listinfo/omnios-discuss> >>> >>> _______________________________________________ >>> OmniOS-discuss mailing list >>> OmniOS-discuss@lists.omniti.com <mailto:OmniOS-discuss@lists.omniti.com> >>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>> <http://lists.omniti.com/mailman/listinfo/omnios-discuss> >> >> >> _______________________________________________ >> OmniOS-discuss mailing list >> OmniOS-discuss@lists.omniti.com <mailto:OmniOS-discuss@lists.omniti.com> >> http://lists.omniti.com/mailman/listinfo/omnios-discuss >> <http://lists.omniti.com/mailman/listinfo/omnios-discuss> >>
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss