This is on OmniOS CE r151024l running in a VMware virtual machine under
ESXi 6.5 with PCI pass-thru to a SAS3008 HBA.
The problem is related to the HBA on pass-thru. If I disconnect it,
everything starts fine, but I am not clear why or how to fix this. I have
done similar VM passthrough setups with older versions of OmniOS and SAS2
HBAs without any problems.
The same HBA was being used successfully in the same configuration with
CentOS 7 in the VM so I know this can function.
I can see all the disks, but cannot import the pool because the fault
manager is not running.
The logs show:
[ Feb 16 10:02:14 Method "start" exited with status 1. ]
[ Feb 16 10:02:14 Executing start method ("/usr/lib/fm/fmd/fmd"). ]
ABORT: attempted zero-length allocation: No such device or address
[ Feb 16 10:02:14 Method "start" exited with status 1. ]
[ Feb 16 10:02:14 Executing start method ("/usr/lib/fm/fmd/fmd"). ]
ABORT: attempted zero-length allocation: No such device or address
[ Feb 16 10:02:14 Method "start" exited with status 1. ]
[ Feb 16 10:05:09 Leaving maintenance because clear requested. ]
[ Feb 16 10:05:09 Enabled. ]
[ Feb 16 10:05:09 Executing start method ("/usr/lib/fm/fmd/fmd"). ]
ABORT: attempted zero-length allocation: No such device or address
[ Feb 16 10:05:10 Method "start" exited with status 1. ]
Any hope of making this work?
Thanks!
-Chip
_______________________________________________
OmniOS-discuss mailing list
[email protected]
http://lists.omniti.com/mailman/listinfo/omnios-discuss
