I found another Fibre Channel card that does not work in OmniOS CE r151026:
Qlogic QLE2740
root@claw:~# prtconf -D | grep pci1077
pci1077,299
root@claw:~# luxadm -e port
ERROR: No Fibre Channel Adapters found.
root@claw:~# fcinfo hba-port
No Adapters Found.
root@claw:~#prtdiag
System Configuration: Supermicro SYS-2029P-C1R
BIOS Configuration: American Megatrends Inc. 2.1 06/29/2018
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
-------------------------------- --------------------------
Intel(R) Xeon(R) Gold 6136 CPU @ 3.00GHz CPU1
Intel(R) Xeon(R) Gold 6136 CPU @ 3.00GHz CPU2
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
----------- ------ --- ------------------- ----------------
DDR4 in use 0 P1-DIMMA1 P0_Node0_Channel0_Dimm0
DDR4 in use 0 P1-DIMMA2 P0_Node0_Channel0_Dimm1
DDR4 in use 0 P1-DIMMB1 P0_Node0_Channel1_Dimm0
DDR4 in use 0 P1-DIMMC1 P0_Node0_Channel2_Dimm0
DDR4 in use 0 P1-DIMMD1 P0_Node1_Channel0_Dimm0
DDR4 in use 0 P1-DIMMD2 P0_Node1_Channel0_Dimm1
DDR4 in use 0 P1-DIMME1 P0_Node1_Channel1_Dimm0
DDR4 in use 0 P1-DIMMF1 P0_Node1_Channel2_Dimm0
DDR4 in use 0 P2-DIMMA1 P1_Node0_Channel0_Dimm0
DDR4 in use 0 P2-DIMMA2 P1_Node0_Channel0_Dimm1
DDR4 in use 0 P2-DIMMB1 P1_Node0_Channel1_Dimm0
DDR4 in use 0 P2-DIMMC1 P1_Node0_Channel2_Dimm0
DDR4 in use 0 P2-DIMMD1 P1_Node1_Channel0_Dimm0
DDR4 in use 0 P2-DIMMD2 P1_Node1_Channel0_Dimm1
DDR4 in use 0 P2-DIMME1 P1_Node1_Channel1_Dimm0
DDR4 in use 0 P2-DIMMF1 P1_Node1_Channel2_Dimm0
==== On-Board Devices =====================================
==== Upgradeable Slots ====================================
ID Status Type Description
--- --------- ---------------- ----------------------------
1 in use PCI Exp. Gen 3 x8 CPU1 Slot1 PCI-E 3.0 X8, LSI Logic / Symbios
Logic MegaRAID SAS-3 3108 [Invader] (mr_sas)
2 available PCI Exp. Gen 3 x16 CPU1 Slot2 PCI-E 3.0 X16
3 in use PCI Exp. Gen 3 x8 CPU1 Slot3 PCI-E 3.0 X8, QLogic Corp.
ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter (<unknown>)
4 available PCI Exp. Gen 3 x16 CPU2 Slot4 PCI-E 3.0 X16
5 available PCI Exp. Gen 3 x16 CPU2 Slot5 PCI-E 3.0 X16
6 in use PCI Exp. Gen 3 x16 CPU2 Slot6 PCI-E 3.0 X16, Intel Corporation
82599ES 10-Gigabit SFI/SFP+ Network Connection (ixgbe)
root@claw:~#
My failures so far:
Qlogic QLE2672
Emulex LPe32000 (Lancer)
Qlogic QLE2740
Can anyone reading this recommend a Fibre Channel Card known to work in r151026?
I really want to stay in OmniOS but my hand may be forced to use Solaris 11.4 :(
Thanks,
Phil
________________________________________
From: Johan Kragsterman <[email protected]>
Sent: Monday, October 22, 2018 10:55 AM
To: Phil Forrest
Cc: [email protected]; Darrel Hankerson
Subject: Ang: RE: [OmniOS-discuss] Recommend any FC Gen 5 or Gen 6 HBAs?
Hi!
-----"Phil Forrest" <[email protected]> skrev: -----
Till: "Johan Kragsterman" <[email protected]>
Från: "Phil Forrest" <[email protected]>
Datum: 2018-10-22 17:37
Kopia: "[email protected]" <[email protected]>,
"Darrel Hankerson" <[email protected]>
Ärende: RE: [OmniOS-discuss] Recommend any FC Gen 5 or Gen 6 HBAs?
Hi Johan,
The Emulex looks fine, the Qlogic is not good:
root@claw:~# prtconf -D | grep pci1077
pci1077,249
pci1077,249
root@claw:~# prtconf -D | grep pci10df
pci10df,e333 (driver name: emlxs)
root@claw:~#
Happily, we only need one of Qlogic or Emulex to work. Both are not needed.
Unfortunately, though the driver (emlxs) appears above, no adapters are found
by fcinfo or luxadm:
root@claw:~# fcinfo hba-port
No Adapters Found.
root@claw:~# luxadm -e port
Cannot operate in the locale requested. Continuing in the default C locale
ERROR: No Fibre Channel Adapters found.
root@claw:~#
Thank you for any advice,
Phil
-----Original Message-----
From: Johan Kragsterman <[email protected]>
Sent: Monday, October 22, 2018 10:02 AM
To: Phil Forrest <[email protected]>
Cc: [email protected]
Subject: Ang: [OmniOS-discuss] Recommend any FC Gen 5 or Gen 6 HBAs?
Hi!
-----"OmniOS-discuss" <[email protected]> skrev: -----
Till: "[email protected]" <[email protected]>
Från: "Phil Forrest"
Sänt av: "OmniOS-discuss"
Datum: 2018-10-22 16:28
Ärende: [OmniOS-discuss] Recommend any FC Gen 5 or Gen 6 HBAs?
Hello everyone,
I have a new project, so everything mentioned here is with clean OS installs.
Not production.
Can anyone recommend a Gen 5 or Gen 6 (preferred) 16GB Fibre Channel HBA known
to work in r151022 or later?
I have tried, without success, to get the following Fibre Channel Cards to work
in a clean r151026 install on SuperMicro System SYS-2029P-C1R
Emulex Corporation Lancer Gen6: LPe32000 Fibre Channel Host Adapter QLogic
Corp. ISP8324-based 16Gb Fibre Channel to PCI Express Adapter
The system sees the hardware:
root@claw:~# prtdiag
System Configuration: Supermicro SYS-2029P-C1R BIOS Configuration: American
Megatrends Inc. 2.1 06/29/2018 BMC Configuration: IPMI 2.0 (KCS: Keyboard
Controller Style)
==== Processor Sockets ====================================
Version Location Tag
-------------------------------- --------------------------
Intel(R) Xeon(R) Gold 6136 CPU @ 3.00GHz CPU1
Intel(R) Xeon(R) Gold 6136 CPU @ 3.00GHz CPU2
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
----------- ------ --- ------------------- ----------------
DDR4 in use 0 P1-DIMMA1 P0_Node0_Channel0_Dimm0
DDR4 in use 0 P1-DIMMA2 P0_Node0_Channel0_Dimm1
DDR4 in use 0 P1-DIMMB1 P0_Node0_Channel1_Dimm0
DDR4 in use 0 P1-DIMMC1 P0_Node0_Channel2_Dimm0
DDR4 in use 0 P1-DIMMD1 P0_Node1_Channel0_Dimm0
DDR4 in use 0 P1-DIMMD2 P0_Node1_Channel0_Dimm1
DDR4 in use 0 P1-DIMME1 P0_Node1_Channel1_Dimm0
DDR4 in use 0 P1-DIMMF1 P0_Node1_Channel2_Dimm0
DDR4 in use 0 P2-DIMMA1 P1_Node0_Channel0_Dimm0
DDR4 in use 0 P2-DIMMA2 P1_Node0_Channel0_Dimm1
DDR4 in use 0 P2-DIMMB1 P1_Node0_Channel1_Dimm0
DDR4 in use 0 P2-DIMMC1 P1_Node0_Channel2_Dimm0
DDR4 in use 0 P2-DIMMD1 P1_Node1_Channel0_Dimm0
DDR4 in use 0 P2-DIMMD2 P1_Node1_Channel0_Dimm1
DDR4 in use 0 P2-DIMME1 P1_Node1_Channel1_Dimm0
DDR4 in use 0 P2-DIMMF1 P1_Node1_Channel2_Dimm0
==== On-Board Devices =====================================
==== Upgradeable Slots ====================================
ID Status Type Description
--- --------- ---------------- ----------------------------
1 in use PCI Exp. Gen 3 x8 CPU1 Slot1 PCI-E 3.0 X8, LSI Logic / Symbios
Logic MegaRAID SAS-3 3108 [Invader] (mr_sas)
2 available PCI Exp. Gen 3 x16 CPU1 Slot2 PCI-E 3.0 X16
3 in use PCI Exp. Gen 3 x8 CPU1 Slot3 PCI-E 3.0 X8, QLogic Corp.
ISP8324-based 16Gb Fibre Channel to PCI Express Adapter (<unknown>)
4 in use PCI Exp. Gen 3 x16 CPU2 Slot4 PCI-E 3.0 X16, Emulex Corporation
Lancer Gen6: LPe32000 Fibre Channel Host Adapter (emlxs)
5 available PCI Exp. Gen 3 x16 CPU2 Slot5 PCI-E 3.0 X16
6 in use PCI Exp. Gen 3 x16 CPU2 Slot6 PCI-E 3.0 X16, Intel Corporation
82599ES 10-Gigabit SFI/SFP+ Network Connection (ixgbe)
root@claw:~#
root@claw:~# fcinfo hba-port
No Adapters Found.
Thanks for any comments,
Phil
I was writing to you before about this, and I suggested you to check the driver:
root@omni:~# prtconf -D | grep pci1077
pci1077,138, instance #0 (driver name: qlc)
pci1077,138, instance #1 (driver name: qlc) root@omni:~#
If your pci addr still is pci1077? Which it was according to your previous mail
in this issue.
Did you check that? If so, what was the output?
If it shows up empty, no driver is attached, and I'm sure no driver is
available in omnios.
I can't tell about the other Illumos distros, perhaps you check with Nexenta,
they should at least know if there is an Illumos driver or not...
Rgrds Johan
I haven't worked much with Emulex, I always thought they were complicated, and
people have reported problems with their driver.
Anyway, what I know there should(was) be a driver file in:
/kernel/drv/emlxs.conf. Check it out, it might give something....
Rgrds JK
_______________________________________________
OmniOS-discuss mailing list
[email protected]
http://lists.omniti.com/mailman/listinfo/omnios-discuss
_______________________________________________
OmniOS-discuss mailing list
[email protected]
http://lists.omniti.com/mailman/listinfo/omnios-discuss
