Dan Mick pisze: > Are you sure you've got the updated grub? The system is BFUed from SXCE90 and SXCE90 was Live Upgraded from SXCE89 and so on... The current system is running on ZFS root. I migrated from UFS to ZFS by Live Upgrade.
Well, I added '-v' to the kernel options and now I know what kernel file is loaded, but this is not a remedy. > > Piotr Jasiukajtis / estibi wrote: >> Hi, >> >> After install kernel on ZFS root (Install -G kernel.orig -k i86pc) it >> cannot find root filesystems (hg revision 6857) ... >> I rebooted it with 'reboot -- 'kernel.orig/unix'. >> >> module /platform/i86pc/kernel.orig/unix: text at [0xfe800000, >> 0xfe8e3627] data at 0xfec00000 >> module /platform/i86pc/kernel.orig/genunix: text at [0xfe8e3628, >> 0xfeb19d1f] data at 0xfec4be00 >> Loading kmdb... >> module /platform/i86pc/kernel.orig/misc/kmdbmod: text at [0xfeb19d20, >> 0xfeb81737] data at 0xfec97820 >> module /platform/i86pc/kernel.orig/misc/ctf: text at [0xfeb81738, >> 0xfeb88a0f] data at 0xfeca8390 >> SunOS Release 5.11 Version ON-20080612_6857-d 32-bit >> Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved. >> Use is subject to license terms. >> DEBUG enabled >> features: >> 1003fff<cpuid,sse,sep,pat,cx8,pae,mca,mmx,cmov,de,pge,mtrr,msr,tsc,lgpg> >> mem = 1572412K (0x5ff8f000) >> initialized model-specific module 'cpu_ms.AuthenticAMD' on chip 0 core 0 >> strand 0 >> root nexus = i86pc >> pseudo0 at root >> pseudo0 is /pseudo >> scsi_vhci0 at root >> scsi_vhci0 is /scsi_vhci >> isa0 at root >> pseudo-device: acpippm0 >> acpippm0 is /pseudo/acpippm at 0 >> pseudo-device: ppm0 >> ppm0 is /pseudo/ppm at 0 >> pci0 at root: space 0 offset 0 >> pci0 is /pci at 0,0 >> IDE device at targ 0, lun 0 lastlun 0x0 >> model ST340810A >> ATA/ATAPI-6 supported, majver 0x7e minver 0x0 >> ata_set_feature: (0x66,0x0) failed >> ata_set_feature: (0x66,0x0) failed >> PCI-device: ide at 0, ata0 >> ata0 is /pci at 0,0/pci-ide at 2,5/ide at 0 >> UltraDMA mode 5 selected >> cmdk0 at ata0 target 0 lun 0 >> cmdk0 is /pci at 0,0/pci-ide at 2,5/ide at 0/cmdk at 0,0 >> NOTICE: mount: not a UFS magic number (0x0) >> >> panic[cpu0]/thread=fec24160: cannot mount root path >> /pci at 0,0/pci-ide at 2,5/ide at 0/cmdk at 0,0:d >> >> fec3c2bc genunix:rootconf+10b (c0f040, 1, fec238d0) >> fec3c2e0 genunix:vfs_mountroot+54 (fe800010, fec380f0,) >> fec3c304 genunix:main+f1 () >> >> panic: entering debugger (no dump device, continue to reboot) >> >> Welcome to kmdb >> kmdb: unable to determine terminal type: assuming `vt100' >> Loaded modules: [ scsi_vhci uppc ufs unix krtld genunix specfs pcplusmp ] >> >> >> It seems that grub entries are not created properly. >> I created them manually, and my question is how can I know which kernel >> file is loaded? >> kernel/unix or kernel.orig/unix ? >> >> > -- Regards, Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com
