Okay, thanks for pointing that out. I think redeploying ONAP stack is not necessary? Will it be fine if I just change the Zone in config.yaml in DCAE and rerun dcae_install.sh<http://install.sh> manually?
Also, do you think this is causing the problem of missing files and directories? Thanks, Arun On Jul 19, 2017, at 11:06 PM, "LUND, CARSTEN (CARSTEN)" <[email protected]<mailto:[email protected]>> wrote: I noticed this from the log + export 'ZONE=NorthIndia ' + ZONE='NorthIndia ' Note the space after NorthIndia. Please remove from config.yaml and redeploy. Carsten From: [email protected] [mailto:[email protected]] On Behalf Of Arun Arora (c) Sent: Wednesday, July 19, 2017 9:29 AM To: MAJHI, TAPAN <[email protected]>; Josef Reisinger <[email protected]>; FREEMAN, BRIAN D <[email protected]>; [email protected] Subject: Re: [onap-discuss] DCAE controller-startup.sh fails and throws error Hi All, Regarding the issue I am facing for DCAE VMs deployment, the immediate blocker for me is required files and directories are not found (like cdap-instances, docker-instances, docker-instances). I am suspecting these directories are created in run-time as I searched them in the DCAA VM, Container and DCAE Demo Gittree but couldn’t find them. Attaching the execution logs for your reference. All errors for missing files, directories are mentioned as exceptions in the attached execution log. 1) I tried with rel-1.0 and rel-1.1 but both gave same errors 2) Also tried with both 2-NIC and 1-NIC-FLOATING-IPS. No luck in this as well 3) Currently using 1-NIC-FLOATING-IPS 4) Verified config.yaml parameters with all configurations and modifications in https://jira.onap.org/browse/DCAEGEN2-69<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_DCAEGEN2-2D69&d=DwMFbw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=wKSsBuKcwb-yOFNZ-4j0GFsOhBi04TSHpeurhGYoowc&s=x9vbCOR7PMyD5zqdPNwOrBzzu5AzwHTpibe38mKw_5U&e=> and https://jira.onap.org/browse/DCAEGEN2-7<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_DCAEGEN2-2D7&d=DwMFbw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=wKSsBuKcwb-yOFNZ-4j0GFsOhBi04TSHpeurhGYoowc&s=JAUYoAH40fyO9lQIxsuLyGKU39S8hrp3tV0QTRPejTY&e=> 5) Found some more config issues in the config.yaml and fixed 6) Finally, made sure the execution is going as per the sequence mentioned in https://wiki.onap.org/display/DW/DCAE+Controller+Development+Guide<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_DCAE-2BController-2BDevelopment-2BGuide&d=DwMFbw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=wKSsBuKcwb-yOFNZ-4j0GFsOhBi04TSHpeurhGYoowc&s=KDuvw3WyD439YC7FBvf5_o6-kl-Fvf-JyATvZ6a_zBw&e=> The problem happens with the following command execution done as part of ‘make gen-config sync restart’ java -cp 'lib/*' org.openecomp.dcae.controller.operation.utils.GenControllerConfiguration $ZONE . GITLINK OPENECOMP-DEMO I am not able to find the directories/ files listed in the errors. Any pointers from anyone who have fixed these issues? @Tapan, @Joseph, @Brian, special mention to you for any pointers to resolve this issue, as you have finished the deployment (Congrats BTW ☺ ) Thanks & Regards, Arun Arora PS: Wanted to mention again, I am deploying on VIO (VMware Integrated OpenStack) From: Kanagaraj Manickam [mailto:[email protected]] Sent: Tuesday, July 18, 2017 8:29 PM To: Arun Arora (c) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: RE: DCAE controller-startup.sh fails and throws error We also faced this issue and created an JIRA ID: DCAEGEN2-69 And we tried to provided required conf and logs. Please let us know if additional details required. Thanks. Regards Kanagaraj M *************************************************************************************** 本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！************************************************************************************** *************************************************************************************** This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! *************************************************************************************** From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Arun Arora (c) Sent: Tuesday, July 18, 2017 7:47 PM To: [email protected]<mailto:[email protected]> Subject: [onap-discuss] DCAE controller-startup.sh fails and throws error Hi All, We are trying to deploy ONAP on VIO. Using the following YAML and env files: https://gerrit.onap.org/r/gitweb?p=demo.git;a=blob;f=heat/OpenECOMP/onap_openstack_float.yaml;h=659f94c93b9c5dfae02031ddcae82161ce927318;hb=refs/heads/master<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_gitweb-3Fp-3Ddemo.git-3Ba-3Dblob-3Bf-3Dheat_OpenECOMP_onap-5Fopenstack-5Ffloat.yaml-3Bh-3D659f94c93b9c5dfae02031ddcae82161ce927318-3Bhb-3Drefs_heads_master&d=DwMFAw&c=uilaK90D4TOVoH58JNXRgQ&r=fJSaCk5Dtn2KbIeqRCU_Kzr_L_vL-XtXjh29c6PfRGQ&m=zrc-GVhLuvDnJELIWxkFoSvWNs8xW9XW8HL__4WXtq0&s=e2BKS-04aVk_DBrGy95rNYBvS4OSSnyOGF9r40KQiCc&e=> https://gerrit.onap.org/r/gitweb?p=demo.git;a=blob;f=heat/OpenECOMP/onap_openstack_float.yaml;h=659f94c93b9c5dfae02031ddcae82161ce927318;hb=refs/heads/master<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_gitweb-3Fp-3Ddemo.git-3Ba-3Dblob-3Bf-3Dheat_OpenECOMP_onap-5Fopenstack-5Ffloat.yaml-3Bh-3D659f94c93b9c5dfae02031ddcae82161ce927318-3Bhb-3Drefs_heads_master&d=DwMFAw&c=uilaK90D4TOVoH58JNXRgQ&r=fJSaCk5Dtn2KbIeqRCU_Kzr_L_vL-XtXjh29c6PfRGQ&m=zrc-GVhLuvDnJELIWxkFoSvWNs8xW9XW8HL__4WXtq0&s=e2BKS-04aVk_DBrGy95rNYBvS4OSSnyOGF9r40KQiCc&e=> In the DCAE VM, the dcae-controller docker is running however, controller-startup.sh inside it fails with error. Seen the following and fixed 1) /etc/hosts has static IP addresses for each DCAE VM which does not match with the Private subnet IP addresses mentioned in ENV file. So changed the IP addresses in /etc/hosts 2) FYI, the floating IPs for DCAE VMs are created in the VIO and are also mentioned in the ENV file (Total 6 IPs including 1 for dcae-controller) After this, on executing controller-startup.sh, varied errors are seem and finally additional VMs are not created. The command execution gets stuck in a wait loop. Some of the errors are following. 1) destinationRoot=GITLINK/OPENECOMP-DEMO-NorthIndia/controller-gen exception: OPENECOMP-DEMO-NorthIndia/cdap-instances/cdap-tca-hi-lo.yaml class java.nio.file.NoSuchFileException exception: OPENECOMP-DEMO-NorthIndia/cdap-instances/cdap-helloworld.yaml class java.nio.file.NoSuchFileException exception: OPENECOMP-DEMO-NorthIndia/docker-instances/docker-common-event.yaml class java.nio.file.NoSuchFileException exception: OPENECOMP-DEMO-NorthIndia/docker-instances/docker-databus-controller.yaml class java.nio.file.NoSuchFileException exception: OPENECOMP-DEMO-NorthIndia/chef.yaml class java.nio.file.NoSuchFileException exception: OPENECOMP-DEMO-NorthIndia/vm-instances/vm-controller.yaml class java.nio.file.NoSuchFileException XXXXX: ./OPENECOMP-DEMO-NorthIndia/vm-config/vm-controller exception: OPENECOMP-DEMO-NorthIndia/vm-instances/vm-postgresql.yaml class java.nio.file.NoSuchFileException 2) Enter keystore password: keytool error: java.lang.Exception: Certificate not imported, alias <simpledemo-root-ca> already exists Complete Log file is attached. Attaching all logs files for reference. Pls point to any possible solution for this. Thanks & Regards, Arun Arora
_______________________________________________ onap-discuss mailing list [email protected] https://lists.onap.org/mailman/listinfo/onap-discuss
