Hi Xin, I confirm what Adam said. At this stage you will need to create a new blueprint with the correct DMAAP configuration and then distribute it to CLAMP so that it can be deployed.
Note that on-demand collector deployment is not supported by DCAE itself at this point, so it has to be supported by DCAE first before CLAMP can support it. Also, one Holmes instance per Control Loop is not supported by Holmes/DCAE, so this is also an area that will need Holmes/DCAE support before it can be done via CLAMP. Br, Martial From: onap-discuss@lists.onap.org <onap-discuss@lists.onap.org> On Behalf Of Xin Miao Sent: mardi 7 août 2018 16:41 To: Horn, Linda (Nokia - US/Murray Hill) <linda.h...@nokia.com>; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp Hi, Linda, Please refer to the following CCVPN Close Loop wiki page for the Restconf collector in DCAE session from the high level. The page is under construction. https://wiki.onap.org/display/DW/CCVPN+Close+Loop<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_CCVPN-2BClose-2BLoop&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=_9Jlwl24cXmOrt_XOMKtC3aGkkZwuKoKxSPqhA05BWk&m=IzLUgi1XcssgabsQcEs8UPGkBv0u3uWH7wPhwDGCqUQ&s=EsuXrJpKYwWKffGDgInJnQV23gU__Zxvw73KGXB19QI&e=>. Thank you and best regards, Xin Miao American Network Technology Lab Futurewei Technologies, Inc. 5340 Legacy Dr., Suite 175 Plano, TX 75024 Phone: 469-277-5884; Mobile:469-268-5226 xin.m...@huawei.com<mailto:xin.m...@huawei.com> [cid:image001.jpg@01CD505D.C18C2420] From: Horn, Linda (Nokia - US/Murray Hill) [mailto:linda.h...@nokia.com] Sent: 2018年8月7日 AM 9:01 To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao <xin.m...@huawei.com<mailto:xin.m...@huawei.com>> Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp What is a Restconf Collector and for what types of events is it used? How is it different from the normal VES Collector? Linda ----------------------------------------------------------------------------------- Linda S. Horn, DMTS ATF Architecture Open RAN Initiatives Mobile Networks, Nokia Phone: +1-908-679-6580 From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> On Behalf Of Xin Miao Sent: Tuesday, August 07, 2018 9:47 AM To: Krysiak, Adam (Nokia - PL/Wroclaw) <adam.krys...@nokia.com<mailto:adam.krys...@nokia.com>>; Ngueko, Gervais-Martial <gn4...@intl.att.com<mailto:gn4...@intl.att.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Sébastien Determe <sd3...@intl.att.com<mailto:sd3...@intl.att.com>> Cc: SHACHAM, RON <rshac...@research.att.com<mailto:rshac...@research.att.com>>; VENKATESH KUMAR, VIJAY <vv7...@att.com<mailto:vv7...@att.com>> Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp Thanks, Adam. In my case, I am using an new type of collector, Restconf collector (going to be added into DCAE), and Holmes. Thank you and best regards, Xin Miao American Network Technology Lab Futurewei Technologies, Inc. 5340 Legacy Dr., Suite 175 Plano, TX 75024 Phone: 469-277-5884; Mobile:469-268-5226 xin.m...@huawei.com<mailto:xin.m...@huawei.com> [cid:image001.jpg@01CD505D.C18C2420] From: Krysiak, Adam (Nokia - PL/Wroclaw) [mailto:adam.krys...@nokia.com] Sent: 2018年8月7日 AM 8:40 To: Ngueko, Gervais-Martial <gn4...@intl.att.com<mailto:gn4...@intl.att.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao <xin.m...@huawei.com<mailto:xin.m...@huawei.com>>; Sébastien Determe <sd3...@intl.att.com<mailto:sd3...@intl.att.com>> Cc: SHACHAM, RON <rshac...@research.att.com<mailto:rshac...@research.att.com>>; VENKATESH KUMAR, VIJAY <vv7...@att.com<mailto:vv7...@att.com>> Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp Hi Xin, I will try to answer your question, please someone correct me if I'm wrong. Deploy of closed loop means that Clamp will send request to DCAE platform to start new instance of TCA (may be different tool but Clamp UI supports only TCA and Holmes). You're writing that you want to receive different event data so I assume you're not interested in measurements. It means you have to use other type of analytic tool (I will call it AT) then those already available. It's your AT's responsibility to pull events from DMaaP. From Clamp perspective it's transparent what's the event type and topic. Clamp will just send configuration parameters before deployment. Unfortunately currently using own AT is not supported by Clamp. Br, Adam Krysiak Software Engineer MN MANO RD&Pz ONAP-UI-ML DEVOPS WRO 2 SG Nokia Contact number: +48691441316 ________________________________ From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> on behalf of Xin Miao <xin.m...@huawei.com<mailto:xin.m...@huawei.com>> Sent: Saturday, August 4, 2018 6:43:56 PM To: Ngueko, Gervais-Martial Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, RON; VENKATESH KUMAR, VIJAY Subject: Re: [onap-discuss] [CLAMP][DCAE]RE: New Collector in Clamp So at runtime if I want to bring up new instance of control loop that would have the VES collector receiving different event data and publish them on DMAAP with different topics from existing control loop, what I am going to do? Thank you and best regards, Xin Miao American Network Technology Lab Futurewei Technologies, Inc. 5340 Legacy Dr., Suite 175 Plano, TX 75024 Phone: 469-277-5884; Mobile:469-268-5226 xin.m...@huawei.com<mailto:xin.m...@huawei.com> [cid:image001.jpg@01CD505D.C18C2420] From: Ngueko, Gervais-Martial [mailto:gn4...@intl.att.com] Sent: 2018年7月30日 PM 3:41 To: Xin Miao <xin.m...@huawei.com<mailto:xin.m...@huawei.com>> Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, RON <rshac...@research.att.com<mailto:rshac...@research.att.com>> Subject: [CLAMP][DCAE]RE: New Collector in Clamp Hi, Currently collector’s are not deployed on-demand, they are pre-deployed in DCAE and used by all the mS and all control loops. So the collector’s, currently, are not deployed via CLAMP and there is no cloudify blueprint available to do so anyway. The collector box you see in CLAMP GUI is just a virtual box to show the control loop flow, in reality there is no configuration made by CLAMP for the collector(at least at this stage of ONAP, it might change in the future). Br, Martial From: Xin Miao <xin.m...@huawei.com<mailto:xin.m...@huawei.com>> Sent: lundi 30 juillet 2018 21:14 To: Ngueko, Gervais-Martial <gn4...@intl.att.com<mailto:gn4...@intl.att.com>> Subject: New Collector in Clamp Hi, Gervias, This is Xin Miao from Huawei and I am new to CLAMP. Is there any code change to be done in CLAMP to support a new type of collector? If not, what template or configuration files need to be created or updated to support it? Thank you and best regards, Xin Miao American Network Technology Lab Futurewei Technologies, Inc. 5340 Legacy Dr., Suite 175 Plano, TX 75024 Phone: 469-277-5884; Mobile:469-268-5226 xin.m...@huawei.com<mailto:xin.m...@huawei.com> [cid:image001.jpg@01CD505D.C18C2420] -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11750): https://lists.onap.org/g/onap-discuss/message/11750 Mute This Topic: https://lists.onap.org/mt/24220548/21656 Group Owner: onap-discuss+ow...@lists.onap.org Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
