On Jun 14, 2:59 am, Mike Christie <[EMAIL PROTECTED]> wrote: > swejis wrote: > > I managed to reconfigure the nop-timeouts and set both timeout and > > interval to zero. > > > manjula:/ # iscsiadm -m node -T iqn. > > 1994-12.com.promise.target.a9.39.4.55.1.0.0.20 -p 192.168.43.5:3260 -o > > update -n node.conn[0].timeo.noop_out_interval -v 0 > > manjula:/ # iscsiadm -m node -T iqn. > > 1994-12.com.promise.target.a9.39.4.55.1.0.0.20 -p 192.168.43.5:3260 -o > > update -n node.conn[0].timeo.noop_out_timeout -v 0 > > > manjula:/ # iscsiadm -m node --targetname iqn. > > 1994-12.com.promise.target.a9.39.4.55.1.0.0.20 | grep noop > > node.conn[0].timeo.noop_out_interval = 0 > > node.conn[0].timeo.noop_out_timeout = 0 > > node.conn[0].timeo.noop_out_interval = 0 > > node.conn[0].timeo.noop_out_timeout = 0 > > > Still I'm seeing quite a few connection errors (with the latest path > > applied) > > Yeah, something is still setting the nops somehow so we are still > hitting the same problem. If you do > > cat /sys/class/iscsi_connection/connectionX:0/ping_tmo > cat /sys/class/iscsi_connection/connectionX:0/recv_tmo > > Do you see 5 for both values (X would be the session number)?
indeed.. manjula:~ # cat /sys/class/iscsi_connection/connection*/recv_tmo 5 5 manjula:~ # cat /sys/class/iscsi_connection/connection*/ping_tmo 5 5 > Could also send the beginning of the log where you login and see the > scsi devices get added? The parts right after: > > Loading iSCSI transport class v2.0-869. > iscsi: registered transport (tcp) > > Up to the parts where you see the last scsi device get added. I previously posted this file: http://www.wehay.com/messages.1.gz wont that do ? > Also what arch are you running? Are you running x86 or x86_64? If the > latter are you running both 64bit kernels and userspace? Everything should have been built for the x86_64 architecture. manjula:/sbin # file iscsid iscsid: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), for GNU/ Linux 2.6.4, dynamically linked (uses shared libs), not stripped manjula:/lib/modules/2.6.25.3-2-default/kernel/drivers/scsi # ls | grep iscsi | while read i ; do file $i ; done iscsi_tcp.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped libiscsi.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped scsi_transport_iscsi.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped > And could you just run iscsid by hand with > > iscsid -d 8 -f & > > login to the target then send the output? You do not have to do any > other IO. I just want to make sure the params are getting sent to the > kernel right. I'll do that later tonight. Brgds Jonas --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
