On 26 Aug., 10:46, "Ulrich Windl" <ulrich.wi...@rz.uni-regensburg.de> wrote: > >>> Shyam Iyer <shyam_i...@dell.com> schrieb am 25.08.2010 um 19:50 in > >>> Nachricht > > <4c7557f7.9000...@dell.com>: > > > On 08/25/2010 06:43 AM, Ciprian Marius Vizitiu (GBIF) wrote: > > > Michael Wolf wrote: > > >> Only four of them are connected to the SAN. How to figure out which hw- > > >> adress belongs to which interface? > > > Perhaps BIOS / iface's ROM util should give you some hint(s). > > > Offload HW address = ethX HW Address + 1 > > For a HP DL380G5 the ILO2 reports these under "System Information"/"NIC": > Port 1 NIC MAC address: 00:1A:4B:4D:25:B2 > Port 2 NIC MAC address: 00:1A:4B:4D:25:B0 > iLO 2: 00:1A:4B:4D:25:B4 > Port 1 iSCSI MAC address: 00:1A:4B:4D:25:B3 > Port 2 iSCSI MAC address: 00:1A:4B:4D:25:B1 > > So maybe it's a good idea to look at your management interface... > > Ulrich
Hi All, Thank you for the information on hw addresses. It`s clear now. We use OEL 5.5 kernel which is based on RHEL 5.5. Is it correct to set the parameters node.conn[0].timeo.noop_out_timeout = 0 node.conn[0].timeo.noop_out_interval = 0 to work with equallogic boxes? node.session.iscsi.FastAbort = No Any other issues with config files? On a second box I had done a fresh RHEL 5.5 installation from scratch. When I have problems here I think the best way is to open a new discussion for that. Hopefully original RHEL will work better than OEL. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
