I try to connect a qnap NAS with my openSuSE 11.3 box. In the yast module the volumes are detected correctly. Also creating a primary partition of type 83 with "fdisk /dev/sdb" works without any problems. But when I try to format that partition I get loads of errors. There are three types of errors which are repeated very often:
Nov 2 10:38:55 mailserver kernel: [609129.940324] Buffer I/O error on device sdb1, logical block 397065 Nov 2 10:38:55 mailserver kernel: [609129.940326] lost page write due to I/O error on sdb1 Nov 2 10:38:55 mailserver kernel: [609129.941349] sd 6:0:0:0: [sdb] Unhandled error code Nov 2 10:38:55 mailserver kernel: [609129.941351] sd 6:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK Nov 2 10:38:55 mailserver kernel: [609129.941354] sd 6:0:0:0: [sdb] CDB: Write(10): 2a 00 00 80 51 3f 00 04 00 00 Nov 2 10:38:55 mailserver kernel: [609129.941361] end_request: I/O error, dev sdb, sector 8409407 Nov 2 10:38:55 mailserver iscsid: Kernel reported iSCSI connection 4:0 error (1020) state (3) Nov 2 10:38:58 mailserver iscsid: connection4:0 is operational after recovery (1 attempts) Has anybody an idea what is wrong, and what I can do to format/use this iscsi volume. The NAS works fine with other clients. The version of open iscsi is 2.0.870 release 32.1 Thanks for any help -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.