Modified the handling of the remote TCP RST code so the chip can now
flush the tx pipe accordingly upon a remote TCP RST reception.
Signed-off-by: Eddie Wai <eddie....@broadcom.com>
---
drivers/scsi/bnx2i/bnx2i_hwi.c | 8 ++++++--
drivers/scsi/bnx2i/bnx2i_iscsi.c | 8 +++-----
2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index c9a3c0f..0d40dae 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -2350,10 +2350,14 @@ static void bnx2i_cm_remote_close(struct cnic_sock
*cm_sk)
static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
{
struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+ u32 old_state = ep->state;
ep->state = EP_STATE_TCP_RST_RCVD;
- if (ep->conn)
- bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+ if (old_state == EP_STATE_DISCONN_START)
+ wake_up_interruptible(&ep->ofld_wait);
+ else
+ if (ep->conn)
+ bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
}
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index b766812..4882b00 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1907,6 +1907,7 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint
*bnx2i_ep)
switch (bnx2i_ep->state) {
case EP_STATE_CONNECT_START:
+ case EP_STATE_CONNECT_FAILED:
case EP_STATE_CLEANUP_FAILED:
case EP_STATE_OFLD_FAILED:
case EP_STATE_DISCONN_TIMEDOUT:
@@ -1922,13 +1923,10 @@ static int bnx2i_ep_tcp_conn_active(struct
bnx2i_endpoint *bnx2i_ep)
ret = 1;
break;
case EP_STATE_TCP_RST_RCVD:
- ret = 0;
- break;
- case EP_STATE_CONNECT_FAILED:
if (cnic_dev_10g)
- ret = 1;
- else
ret = 0;
+ else
+ ret = 1;
break;
default:
ret = 0;
--
1.7.0.5
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-is...@googlegroups.com.
To unsubscribe from this group, send email to
open-iscsi+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
