The hba will now be unregistered and freed when iSCSI offload is not supported by the NIC.
Signed-off-by: Eddie Wai <eddie....@broadcom.com> --- drivers/scsi/bnx2i/bnx2i_init.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 72a7b2d..6afaa34 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -161,6 +161,21 @@ void bnx2i_start(void *handle) struct bnx2i_hba *hba = handle; int i = HZ; + if (!hba->cnic->max_iscsi_conn) { + printk(KERN_ALERT "bnx2i: dev %s does not support " + "iSCSI\n", hba->netdev->name); + + if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) { + mutex_lock(&bnx2i_dev_lock); + list_del_init(&hba->link); + adapter_count--; + hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI); + clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic); + mutex_unlock(&bnx2i_dev_lock); + bnx2i_free_hba(hba); + } + return; + } bnx2i_send_fw_iscsi_init_msg(hba); while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--) msleep(BNX2I_INIT_POLL_TIME); -- 1.7.0.5 -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.