On 23/06/2013 17:40, Or Gerlitz wrote:
there you go, here's the output
isert_cma_handler: event 4 status 0 conn ffff88011a55d600 id
ffff8801085c5400
RDMA_CM_EVENT_CONNECT_REQUEST: >>>>>>>>>>>>>>>
Entering isert_connect_request cma_id: ffff8801085c5400, context:
ffff88011a55d600
Using responder_resources: 1 initiator_depth: 4
Set login_buf: ffff880116a38000 login_req_buf: ffff880116a38000
login_rsp_buf: ffff880116a3a000
Using 3 CQs, device mlx4_0 supports 3 vectors
[...]
and here's the initiator output (if you set debug_level=3 for ib_iser)
iser: iser_rcv_completion:op 0x3f itt 0xffffffff dlen 0
iser: iscsi_iser_recv:wrong datalen 48 (hdr), 0 (IB)
This means that LIO sent ISCSI_OP_REJECT (0x3f) and that there's a bug
for reject since the iSCSI header
says there are 48 bytes beyond the BHS but on the wire [1] there where none
Or.
[1] its ib_wc->byte_len minus the iscsi/iser headers, see this code in
the initiator
iscsi_iser_recv(conn->iscsi_conn, hdr,
rx_desc->data, rx_xfer_len - ISER_HEADERS_LEN);
# dmesg
iser: iser_connect:connecting to: 192.168.20.199, port 0xc70c
iser: iser_cma_handler:event 0 status 0 conn ffff880070ee33f0 id
ffff880070916800
iser: iscsi_iser_ep_poll:ib conn ffff880070ee33f0 rc = 0
iser: iser_cma_handler:event 2 status 0 conn ffff880070ee33f0 id
ffff880070916800
fmr_pool: Device mlx4_0 does not support FMRs
iser: iser_create_ib_conn_res:FMRs are not supported, using unaligned mode
iser: iser_create_ib_conn_res:cq index 1 used for ib_conn ffff880070ee33f0
iser: iser_create_ib_conn_res:setting conn ffff880070ee33f0 cma_id
ffff880070916800: fmr_pool (null) qp ffff880070916400
iser: iser_cma_handler:event 9 status 0 conn ffff880070ee33f0 id
ffff880070916800
iser: iscsi_iser_ep_poll:ib conn ffff880070ee33f0 rc = 1
scsi2 : iSCSI Initiator over iSER
iser: iscsi_iser_conn_bind:binding iscsi/iser conn ffff88007a740490
ffff88007a740700 to ib_conn ffff880070ee33f0
iser: iscsi_iser_mtask_xmit:mtask xmit [cid 0 itt 0x0]
iser: iser_post_rx_bufs:req op 43 flags 87
iser: iser_post_rx_bufs:Initially post: 32
iser: iser_rcv_completion:op 0x23 itt 0x0 dlen 176
iser: iscsi_iser_recv:aligned datalen (173) hdr, 176 (IB)
iser: iser_cq_tasklet_fn:got 1 rx 1 tx completions
iser: iscsi_iser_mtask_xmit:mtask xmit [cid 0 itt 0x0]
iser: iser_post_rx_bufs:req op 4 flags 80
iser: iser_rcv_completion:op 0x3f itt 0xffffffff dlen 0
iser: iscsi_iser_recv:wrong datalen 48 (hdr), 0 (IB)
connection3:0: detected conn error (1006)
iser: iser_cq_tasklet_fn:got 1 rx 1 tx completions
iser: iscsi_iser_ep_disconnect:ib conn ffff880070ee33f0 state 2
iser: iser_cq_tasklet_fn:got 64 rx 0 tx completions
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to open-iscsi+unsubscr...@googlegroups.com.
To post to this group, send email to open-iscsi@googlegroups.com.
Visit this group at http://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/groups/opt_out.