I did: root@Charon:/home/amonra# mt -f /dev/st0 fsf 1 mt: /dev/st0: rmtioctl failed: Input/output error root @Charon:/home/amonra#
The rmtioctl message appeared after about 10-15 seconds, and the iSCSI target showed that the session had dropped after another 10-15 seconds. When I was returned to the command line prompt, the target showed the session as connected again. During most/all of this time the forward space file operation was still running. root@Charon:/home/amonra# iscsiadm -m node --targetname "iqn.2008-08.com.starwindsoftware:mercury-ultrium2" --portal "192.168.129.77:3260" # BEGIN RECORD 2.0-873 node.name = iqn.2008-08.com.starwindsoftware:mercury-ultrium2 node.tpgt = -1 node.startup = manual node.leading_login = No iface.hwaddress = <empty> iface.ipaddress = <empty> iface.iscsi_ifacename = default iface.net_ifacename = <empty> iface.transport_name = tcp iface.initiatorname = <empty> iface.bootproto = <empty> iface.subnet_mask = <empty> iface.gateway = <empty> iface.ipv6_autocfg = <empty> iface.linklocal_autocfg = <empty> iface.router_autocfg = <empty> iface.ipv6_linklocal = <empty> iface.ipv6_router = <empty> iface.state = <empty> iface.vlan_id = 0 iface.vlan_priority = 0 iface.vlan_state = <empty> iface.iface_num = 0 iface.mtu = 0 iface.port = 0node.discovery_address = 192.168.129.77 node.discovery_port = 3260 node.discovery_type = send_targets node.session.initial_cmdsn = 0 node.session.initial_login_retry_max = 8 node.session.xmit_thread_priority = -20 node.session.cmds_max = 128 node.session.queue_depth = 32 node.session.nr_sessions = 1 node.session.auth.authmethod = None node.session.auth.username = <empty> node.session.auth.password = <empty> node.session.auth.username_in = <empty> node.session.auth.password_in = <empty> node.session.timeo.replacement_timeout = 120 node.session.err_timeo.abort_timeout = 15 node.session.err_timeo.lu_reset_timeout = 30 node.session.err_timeo.tgt_reset_timeout = 30 node.session.err_timeo.host_reset_timeout = 60 node.session.iscsi.FastAbort = Yes node.session.iscsi.InitialR2T = No node.session.iscsi.ImmediateData = Yes node.session.iscsi.FirstBurstLength = 262144 node.session.iscsi.MaxBurstLength = 16776192 node.session.iscsi.DefaultTime2Retain = 0 node.session.iscsi.DefaultTime2Wait = 2 node.session.iscsi.MaxConnections = 1 node.session.iscsi.MaxOutstandingR2T = 1 node.session.iscsi.ERL = 0 node.conn[0].address = 192.168.129.77 node.conn[0].port = 3260 node.conn[0].startup = manual node.conn[0].tcp.window_size = 524288 node.conn[0].tcp.type_of_service = 0 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.auth_timeout = 45 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 5 node.conn[0].iscsi.MaxXmitDataSegmentLength = 0 node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144 node.conn[0].iscsi.HeaderDigest = None node.conn[0].iscsi.DataDigest = NoneThe return to the command prompt took a while longer. node.conn[0].iscsi.IFMarker = No node.conn[0].iscsi.OFMarker = No # END RECORD root@Charon:/home/amonra# I'm guessing that the problem relates to iSCSI timeouts for tape devices. Please can you guide me in baby steps what I need to do to resolve this problem. Thanks Dave -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscr...@googlegroups.com. To post to this group, send email to open-iscsi@googlegroups.com. Visit this group at https://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.