----- Original Message ----- > On 09/11/2016 03:21, Chris Leech wrote: > > On Mon, Nov 07, 2016 at 04:23:10PM -0200, Guilherme G. Piccoli wrote: > >> > >> Sure! Count on us to test any patches. I guess the first step is to > >> reproduce on upstream right? We haven't tested specifically this > >> scenario for long time. Will try to reproduce on 4.9-rc4 and update here. > > > > Great, I'm looking forward to hearing the result. > > > > Assuming it reproduces, I don't think this level of fine grained locking > > is necessarily the best solution, but it may help confirm the problem. > > Especially if the WARN_ONCE I slipped in here triggers. > > Chris, sorry for my huge delay. > Finally I was able to perform tests and I have good news - seems your > patch below fixed the issue.
Thanks for the testing, looks like you have the magic target to reproduce this. I think this verifies what Mike's idea of what was going wrong, and we're way overdue to get this fixed upstream. Thanks to IBM for pushing this, I don't think any major distro is shipping this patch and we don't want to keep having to back it out. The options look like 1) back out the session lock changes that split it into two locks 2) add in the additional locking from this test patch 3) some other fix for the issue of targets that complete tasks oddly I'm leaning to #1, as I don't want to keep adding more locks for this. Sagi, Or, Shlomo? You pushed to keep this from being backed out before. Here's your cause, any better ideas on fixing it? I also tried to go back in the mailing list archives, but I don't see any real numbers for the performance gains. - Chris > Firstly, I was able to reproduce with kernel 4.10-rc6. See the file > repro.out - it's a dump from xmon, the kernel debugger from PowerPC. > With this tool we can dump the exception details, registers, PACA > (Processor Address Communication Area, ppc specific structure) and > dmesg. It took me less than 15 minutes to reproduce. > > Then, I applied your patch on the top of this kernel and the benchmark > was able to successfully complete, in about 3 hours. We can see the > WARN() you added was reached, the attached file dmesg-cleech_patch shows > the kernel log with your patch. > > The workload was FIO benchmark doing both reads and writes to the remote > storage via iSCSI, connected over ethernet direct cabling (10Gb speed). > Distro was Ubuntu 16.04.1 . > > Any more tests or info you need, please let me know! > Cheers, > > > Guilherme > > > > - Chris > > > > --- > > > > diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c > > index f9b6fba..fbd18ab 100644 > > --- a/drivers/scsi/libiscsi.c > > +++ b/drivers/scsi/libiscsi.c > > @@ -560,8 +560,12 @@ static void iscsi_complete_task(struct iscsi_task > > *task, int state) > > WARN_ON_ONCE(task->state == ISCSI_TASK_FREE); > > task->state = state; > > > > - if (!list_empty(&task->running)) > > + spin_lock_bh(&conn->taskqueuelock); > > + if (!list_empty(&task->running)) { > > + WARN_ONCE(1, "iscsi_complete_task while task on list"); > > list_del_init(&task->running); > > + } > > + spin_unlock_bh(&conn->taskqueuelock); > > > > if (conn->task == task) > > conn->task = NULL; > > @@ -783,7 +787,9 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct > > iscsi_hdr *hdr, > > if (session->tt->xmit_task(task)) > > goto free_task; > > } else { > > + spin_lock_bh(&conn->taskqueuelock); > > list_add_tail(&task->running, &conn->mgmtqueue); > > + spin_unlock_bh(&conn->taskqueuelock); > > iscsi_conn_queue_work(conn); > > } > > > > @@ -1474,8 +1480,10 @@ void iscsi_requeue_task(struct iscsi_task *task) > > * this may be on the requeue list already if the xmit_task callout > > * is handling the r2ts while we are adding new ones > > */ > > + spin_lock_bh(&conn->taskqueuelock); > > if (list_empty(&task->running)) > > list_add_tail(&task->running, &conn->requeue); > > + spin_unlock_bh(&conn->taskqueuelock); > > iscsi_conn_queue_work(conn); > > } > > EXPORT_SYMBOL_GPL(iscsi_requeue_task); > > @@ -1512,22 +1520,26 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) > > * only have one nop-out as a ping from us and targets should not > > * overflow us with nop-ins > > */ > > + spin_lock_bh(&conn->taskqueuelock); > > check_mgmt: > > while (!list_empty(&conn->mgmtqueue)) { > > conn->task = list_entry(conn->mgmtqueue.next, > > struct iscsi_task, running); > > list_del_init(&conn->task->running); > > + spin_unlock_bh(&conn->taskqueuelock); > > if (iscsi_prep_mgmt_task(conn, conn->task)) { > > /* regular RX path uses back_lock */ > > spin_lock_bh(&conn->session->back_lock); > > __iscsi_put_task(conn->task); > > spin_unlock_bh(&conn->session->back_lock); > > conn->task = NULL; > > + spin_lock_bh(&conn->taskqueuelock); > > continue; > > } > > rc = iscsi_xmit_task(conn); > > if (rc) > > goto done; > > + spin_lock_bh(&conn->taskqueuelock); > > } > > > > /* process pending command queue */ > > @@ -1535,19 +1547,24 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) > > conn->task = list_entry(conn->cmdqueue.next, struct iscsi_task, > > running); > > list_del_init(&conn->task->running); > > + spin_unlock_bh(&conn->taskqueuelock); > > if (conn->session->state == ISCSI_STATE_LOGGING_OUT) { > > fail_scsi_task(conn->task, DID_IMM_RETRY); > > + spin_lock_bh(&conn->taskqueuelock); > > continue; > > } > > rc = iscsi_prep_scsi_cmd_pdu(conn->task); > > if (rc) { > > if (rc == -ENOMEM || rc == -EACCES) { > > + spin_lock_bh(&conn->taskqueuelock); > > list_add_tail(&conn->task->running, > > &conn->cmdqueue); > > conn->task = NULL; > > + spin_unlock_bh(&conn->taskqueuelock); > > goto done; > > } else > > fail_scsi_task(conn->task, DID_ABORT); > > + spin_lock_bh(&conn->taskqueuelock); > > continue; > > } > > rc = iscsi_xmit_task(conn); > > @@ -1558,6 +1575,7 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) > > * we need to check the mgmt queue for nops that need to > > * be sent to aviod starvation > > */ > > + spin_lock_bh(&conn->taskqueuelock); > > if (!list_empty(&conn->mgmtqueue)) > > goto check_mgmt; > > } > > @@ -1577,12 +1595,15 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) > > conn->task = task; > > list_del_init(&conn->task->running); > > conn->task->state = ISCSI_TASK_RUNNING; > > + spin_unlock_bh(&conn->taskqueuelock); > > rc = iscsi_xmit_task(conn); > > if (rc) > > goto done; > > + spin_lock_bh(&conn->taskqueuelock); > > if (!list_empty(&conn->mgmtqueue)) > > goto check_mgmt; > > } > > + spin_unlock_bh(&conn->taskqueuelock); > > spin_unlock_bh(&conn->session->frwd_lock); > > return -ENODATA; > > > > @@ -1738,7 +1759,9 @@ int iscsi_queuecommand(struct Scsi_Host *host, struct > > scsi_cmnd *sc) > > goto prepd_reject; > > } > > } else { > > + spin_lock_bh(&conn->taskqueuelock); > > list_add_tail(&task->running, &conn->cmdqueue); > > + spin_unlock_bh(&conn->taskqueuelock); > > iscsi_conn_queue_work(conn); > > } > > > > @@ -2897,6 +2920,7 @@ iscsi_conn_setup(struct iscsi_cls_session > > *cls_session, int dd_size, > > INIT_LIST_HEAD(&conn->mgmtqueue); > > INIT_LIST_HEAD(&conn->cmdqueue); > > INIT_LIST_HEAD(&conn->requeue); > > + spin_lock_init(&conn->taskqueuelock); > > INIT_WORK(&conn->xmitwork, iscsi_xmitworker); > > > > /* allocate login_task used for the login/text sequences */ > > diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h > > index 4d1c46a..c7b1dc7 100644 > > --- a/include/scsi/libiscsi.h > > +++ b/include/scsi/libiscsi.h > > @@ -196,6 +196,7 @@ struct iscsi_conn { > > struct iscsi_task *task; /* xmit task in progress */ > > > > /* xmit */ > > + spinlock_t taskqueuelock; /* protects the next three > > lists */ > > struct list_head mgmtqueue; /* mgmt (control) xmit queue */ > > struct list_head cmdqueue; /* data-path cmd queue */ > > struct list_head requeue; /* tasks needing another run */ > > > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscr...@googlegroups.com. To post to this group, send email to open-iscsi@googlegroups.com. Visit this group at https://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.