There's a reasonably detailed howto here: the README-WINDOWS file in the root of the OpenAFS source code tree for instructions and software needed to build OpenAFS on Microsoft Windows
On Sat, May 07, 2016 at 12:25:30AM +0300, Kostas Liakakis wrote: > Hi again, > > I have offered to contribute Windows builders back then but the lack of > any solid how-to has held me back. I have hardware resources (nothing > top-notch but still many units) to contribute but completelly lack the > know how. > > If there is something I can follow that is less vague than "find out > what tools are required, grab a suitable VS version and tweak the > builder as necessary" I'd be happy to chip in. > > -Kostas > > On 05/06/2016 08:03 PM, Benjamin Kaduk wrote: > > Hi all, > > > > It's been more than four months since I sent this call for contributions, > > and there are still no Windows builders configured for the OpenAFS > > buildbot setup. It seems that the time to prepare a patch removing > > Windows support from the master tree is arriving, given the apparent lack > > of community interest in supporting Windows builds. > > > > If anyone had started to prepare a Windows builder to contribute but got > > stuck and was waiting for input from me or someone else, my apologies for > > the oversight; now would be a good time to send a reminder about the > > inquiry. > > > > -Ben > > > -- ******************************** David William Botsch Programmer/Analyst @CNFComputing [email protected] ******************************** _______________________________________________ OpenAFS-devel mailing list [email protected] https://lists.openafs.org/mailman/listinfo/openafs-devel
