On Tue, Aug 14, 2012 at 3:32 PM, Lars Schimmer <l.schim...@cgv.tugraz.at>wrote:
> On 14.08.2012 14:55, Youssef Eldakar wrote: > > > Thanks for all the help. I was able to successfully move volumes using > > 'vos move'. Now, I see that in order to be able to shut down the old > > server, I also have to move the 'dbserver'. I tried searching for > > instructions on doing that but was not quite successful. Any pointers > > would be much appreciated. > > Hi > > moving a DB server is not as trivial as moving the data. > For a start you can setup a new db server for your cell on the new > server and start it beside your old one - if done fine, they do sync > automatic and both will work as expected. > Now you need to see how your clients get known to the DB server - via > CellServDB or via DNS entries - in no.1 you need to change the > cellServDB on each client, on case no.2 you need to change the DNS entries. > Afterwards you can stop the old DB server and the new one should serv > all the data for your clients. > I´ve done it a few times already and it is possible. > OK, I will give it a try. Would the following be the right procedure to use? http://docs.openafs.org/QuickStartUnix/ch03s02.html > > Youssef Eldakar > > Bibliotheca Alexandrina > > > > > MfG, > Lars Schimmer > -- > ------------------------------------------------------------- > TU Graz, Institut für ComputerGraphik & WissensVisualisierung > Tel: +43 316 873-5405 E-Mail: l.schim...@cgv.tugraz.at > Fax: +43 316 873-5402 PGP-Key-ID: 0x4A9B1723 > _______________________________________________ > OpenAFS-info mailing list > OpenAFS-info@openafs.org > https://lists.openafs.org/mailman/listinfo/openafs-info >