On Wed, 24 Sep 2014 08:22:12 -0700 Eric Shell <esh...@soe.ucsc.edu> wrote:
> > Can you run any command successfully with -localauth? A good simple > > test is 'bos status' like you showed; just run it with -localauth. > > Yes, this works. It immediately says that buserver, vlserver, and > ptserver are running normally. That seems a little odd; is it only ptserver that fails? Try these, to check each individual server: bosserver: bos status <server> -localauth vlserver: vos listaddrs -noresolv -localauth ptserver: pts listmax -localauth buserver: backup listhosts -localauth I guess you don't have any fileservers up yet, but if you did, you could check volserver via: volserver: vos listpart <server> -localauth If doing that still shows only ptserver as failing, maybe try getting a packet trace while trying to run the 'pts' command, and sharing that privately. For pts, just capture udp port 7002. (If you want to capture traffic for others, you can just get all udp traffic to be sure.) > > Can you show the contents of rxkad.keytab? Not the keys, obviously; > > just what the principals and enctypes are. > > Sure thing: > > Vno Type Principal Aliases > 2 aes256-cts-hmac-sha1-96 afs/soe.ucsc....@soe.ucsc.edu > 2 des3-cbc-sha1 afs/soe.ucsc....@soe.ucsc.edu > 2 arcfour-hmac-md5 afs/soe.ucsc....@soe.ucsc.edu That's fine. -- Andrew Deason adea...@sinenomine.net _______________________________________________ OpenAFS-info mailing list OpenAFS-info@openafs.org https://lists.openafs.org/mailman/listinfo/openafs-info
