This is a known issue on some platforms, although the exact cause is unknown. I have tried RHEL 5.5 as well as CentOS 5.5 with clusterrepo rpms and been unable to reproduce. I'll keep looking.
Regards -steve On 05/27/2010 06:07 AM, Diego Remolina wrote: > Hi, > > I was running the old rpms from the opensuse repo and wanted to change > over to the latest packages from the clusterlabs repo in my RHEL 5.5 > machines. > > Steps I took > 1. Disabled the old repo > 2. Set the nodes to standby (two node drbd cluster) and turned of openais > 3. Enabled the new repo. > 4. Performed an update with yum -y update which replaced all packages. > 5. The configuration file for ais was renamed openais.conf.rpmsave > 6. I ran corosync-keygen and copied the key to the second machine > 7. I copied the file openais.conf.rpmsave to /etc/corosync/corosync.conf > and modified it by removing the service section and moving that to > /etc/corosync/service.d/pcmk > 8. I copied the configurations to the other machine. > 9. When I try to start either openais or corosync with the init scripts > I get a failure and nothing that can really point me to an error in the > logs. > > Updated packages: > May 26 14:29:32 Updated: cluster-glue-libs-1.0.5-1.el5.x86_64 > May 26 14:29:32 Updated: resource-agents-1.0.3-2.el5.x86_64 > May 26 14:29:34 Updated: cluster-glue-1.0.5-1.el5.x86_64 > May 26 14:29:34 Installed: libibverbs-1.1.3-2.el5.x86_64 > May 26 14:29:34 Installed: corosync-1.2.2-1.1.el5.x86_64 > May 26 14:29:34 Installed: librdmacm-1.0.10-1.el5.x86_64 > May 26 14:29:34 Installed: corosynclib-1.2.2-1.1.el5.x86_64 > May 26 14:29:34 Installed: openaislib-1.1.0-2.el5.x86_64 > May 26 14:29:34 Updated: openais-1.1.0-2.el5.x86_64 > May 26 14:29:34 Installed: libnes-0.9.0-2.el5.x86_64 > May 26 14:29:35 Installed: heartbeat-libs-3.0.3-2.el5.x86_64 > May 26 14:29:35 Updated: pacemaker-libs-1.0.8-6.1.el5.x86_64 > May 26 14:29:36 Updated: heartbeat-3.0.3-2.el5.x86_64 > May 26 14:29:36 Updated: pacemaker-1.0.8-6.1.el5.x86_64 > > Apparently corosync is sec faulting when run from the command line: > > # /usr/sbin/corosync -f > Segmentation fault > > Any help would be greatly appreciated. > > Diego > > > > _______________________________________________ > Pacemaker mailing list: pacema...@oss.clusterlabs.org > http://oss.clusterlabs.org/mailman/listinfo/pacemaker > > Project Home: http://www.clusterlabs.org > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf _______________________________________________ Openais mailing list Openais@lists.linux-foundation.org https://lists.linux-foundation.org/mailman/listinfo/openais