Tokens are always sent unicast - this is how the protocol works. thanks -steve
On 07/22/2011 07:22 AM, Proskurin Kirill wrote: > Hi all. > > Found odd thing - some of my node send unicast while other send > muiltycast and other unicast and multycast... with same configuration > and they all work. > > Sound little confusing, I know. > > corosync-1.4.0 > Config attached. > > I have 3 node: > my108.i has address 10.3.1.108 > my107.i has address 10.3.1.107 > my105.i has address 10.6.1.155 > > I use tcpdump to look at the traffic and see thing like this: > IP (tos 0x0, ttl 62, id 0, offset 0, flags [DF], proto: UDP (17), > length: 98) 10.3.1.108.5404 > 10.6.1.155.5405: UDP, length 70 > IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), > length: 98) 10.6.1.155.5404 > 10.6.1.156.5405: UDP, length 70 > IP (tos 0x0, ttl 29, id 0, offset 0, flags [DF], proto: UDP (17), > length: 110) 10.3.1.107.5404 > 239.255.1.1.5405: UDP, length 82 > IP (tos 0x0, ttl 62, id 0, offset 0, flags [DF], proto: UDP (17), > length: 98) 10.3.1.108.5404 > 10.6.1.155.5405: UDP, length 70 > IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), > length: 98) 10.6.1.155.5404 > 10.6.1.156.5405: UDP, length 70 > > Node see each other and all seems to work but as I understand they > should communicate by multycast. Or not? > > > > _______________________________________________ > Openais mailing list > Openais@lists.linux-foundation.org > https://lists.linux-foundation.org/mailman/listinfo/openais _______________________________________________ Openais mailing list Openais@lists.linux-foundation.org https://lists.linux-foundation.org/mailman/listinfo/openais