Hello guys,
I want to change a nanoBTS's id, so I can control two BTSs each as a
seperate BTS (not as a seperate TRX).
But this is what I get:
$ ./ipaccess-config -u 1801/1/0 10.100.2.27
ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
<0005> abis_nm.c:518 OC=SITE-MANAGER(00) INST=(ff,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07)
<0005> abis_nm.c:518 OC=BTS(01) INST=(00,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE
CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
OML link established using TRX 0
setting Unit ID to '1801/1/0'
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,01) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,02) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,03) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,04) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,05) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,06) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=CHANNEL(03) INST=(00,00,07) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=GPRS-NSE(f0) INST=(00,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=GPRS-CELL(f1) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=GPRS-NSVC(f2) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=GPRS-NSVC(f2) INST=(00,01,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> abis_nm.c:518 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff)
IPACCESS(0xf1): <0005> abis_nm.c:2757 SET NVATTR NACK CAUSE=Parameter
value outside permitted range
Failure to set attribute. This seems fatal
Is this familiar to you?
Thank you.
