Would you mind sharing your entire config? Btw, dtx-used is indeed deprecated now - if you want to enable DTX use dtxu or/and dtxd. If you don't know what DTX is than just remove this line. Having said that, it should not prevent the startup. You might want to check the documentation at
http://ftp.osmocom.org/docs/latest/ On 07/15/2016 02:41 AM, ayush gupta wrote: > Hello everyone, > > i am noob to this field and currently trying to establishing a GSM > network with EDGE support > using this page as guide > http://openbsc.osmocom.org/trac/wiki/Ettus_USRP_B2xx_family#no1 > i am stuck at this command > > sudo osmo-nitb -C -c openbsc.conf -T -P -m > > its giving me following error > > There is no such command. > Error occurred during reading below line: > extension-prefix 0 > > % 'dtx-used' is now deprecated: use dtx * configuration options of BTS instead > Fri Jul 15 05:35:26 2016 <0005> bsc_init.c:492 Failed to parse the config > file: '/home/ryker/openbsc.conf' > > any help would be highly appreciated > thanks -- Max Suraev <[email protected]> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte
