On Sat, 2017-03-11 at 00:42 +0100, Alexander Huemer wrote: > Hi, > > I have a Siemens BS-11 with the factory cable for the LMT that has a > DSUB-9 plug on the non-BTS end. > When I connect a USB<-->RS232 adapter and run either $ cu -l /dev/ttyUSB > or bs11_config -p /dev/ttyUSB0 I do not get any output when I switch on > the BTS. I tried with nullmodem adapter and without just to be sure > since I often mix up the pinouts.
I remember that the LMT did not behave well either with USB serial adapters or with a real serial port. So just to be sure if you have access to a real serial port try it with that. Regards, Daniel
