added my cfg files and hlr 2017-11-24 18:04 GMT+03:00 GSK MOSS <[email protected]>:
> Hi, > I added the line to 'osmo-bts.cfg' and got in terminal something like this: > > > > > *PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not > available yet, fallback to 1.* > and this : > > * Invalid condition detected: Frame difference is 1685248-0 > 1* > What sould I do with that? what is the problem? I thought that I forgot to > change ARFCN in "openbsc.cfg" and then > after changing ARFCN in "openbsc.cfg" I can't even init it. Terminal says: > > > > *root@pc:~# osmo-nitb -c ~/.osmocom/openbsc.cfg -l ~/.osmocom/hlr.sqlite3 > -P -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM<0005> abis_nm.c:2800 (bts=0,trx=0) > Changing adm. state Unlocked -> Unlocked [vty]Reading config failed. > Exiting.* > > May be the problem is in *"*hlr.sqlite3"? I don't know. By the way, how > can I make new *"*hlr.sqlite3"? I lost the tutorial about it. Help me, > pls. Thanks! > > > > 2017-11-24 12:43 GMT+03:00 Vadim Yanitskiy <[email protected]>: > >> Hi, >> >> > <000b> trx_if.c:409 transceiver (phy0.0) rejected TRX command >> > with response: 'RSP SETTSC -1' >> > >> > What is the problem and how can fix it? >> >> The OsmocomBB transceiver is a legacy transceiver, so please add >> the following line to your 'osmo-bts.cfg': >> >> osmotrx legacy-setbsic >> >> And please let me know about the results, I'll correct the wiki. >> >> With best regards, >> Vadim Yanitskiy. >> > >
hlr.sqlite3
Description: Binary data
openbsc.cfg
Description: Binary data
osmo-bts.cfg
Description: Binary data
