On Mon, Mar 31, 2025 at 8:42 PM Pau Espin Pedrol <[email protected]> wrote: > > Hi, > > === socket_sctp: === > > osmo_sock_init2_multiaddr() is failing due to: > > +unable to bind socket: 0.0.0.0:0: Protocol not available > > So sounds like you don't have sctp module enabled in your kernel. > > Check with "$ lsmod | grep sctp" before you run the test: > sctp 536576 70 > ip6_udp_tunnel 16384 1 sctp > udp_tunnel 28672 1 sctp > libcrc32c 12288 2 btrfs,sctp > > AFAIR if it's available it should be loaded automatically. You can try > loading it with "sudo modprobe sctp". > > > > === osmo_io_test: === > > > +failure during io_uring_queue_init(): Function not implemented > > Which kernel version are you running? An old one? It may not have > io_uring support we require from the kernel. Maybe older liburing than > expected too? > It's the latest fedora 43 (rawhide), the build kernel is IMHO 6.13.8. Check the full native build and test log on: https://koji.fedoraproject.org/koji/taskinfo?taskID=130969129 Click s390x, then build.log and you will see the full build log with the testsuite.log embedded. It's marked as the passed build, because I bypassed the error code test, but the tests failures are clearly visible in the log
thanks & regards Jaroslav
