Hi:
I cannot get my IBM T23 to hibernate when I press Fn-F12. Instead the
a curses display appears on the screen that says it is Phoenix BIOS
hibernate and progress bars are shown. One progress shows the memory
being written to disk but the progress bar stops halfway through it's
progres. At this point a little half moon flashes on the right hinge.
The computer is hung and I must do a hard reboot.
Here is my fdisk layout:
$ fdisk wd0
Disk: wd0 geometry: 3876/240/63 [58605120 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 04 0 1 1 - 50 239 63 [ 63: 771057 ] DOS FAT-16
*1: A6 51 0 1 - 3875 239 63 [ 771120: 57834000 ] OpenBSD
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Here is my info:
IBM T23 Thinkpad
$ uname -a
OpenBSD puffy.colobsd.us 4.1 GENERIC#0 i386
$ sysctl -a | grep hw
hw.machine=i386
hw.model=Intel(R) Pentium(R) III Mobile CPU 1133MHz ("GenuineIntel" 686-class)
hw.ncpu=1
hw.byteorder=1234
hw.physmem=267350016
hw.usermem=267345920
hw.pagesize=4096
hw.disknames=wd0,cd0
hw.diskcount=2
hw.cpuspeed=1133
hw.vendor=IBM
hw.product=26474MU
hw.serialno=78TRH6G
hw.uuid=e588ea01-44d1-11cb-b0f1-f216e30e7163
Here is the out put of apm
$ apm
Battery state: high, 100% remaining, 0 minutes life estimate
A/C adapter state: connected
Performance adjustment mode: manual (1133 MHz)
(I have apm enabled in /etc/rc.conf)
Output of dmesg:
_______________________________________--
OpenBSD 4.1 (GENERIC) #0: Fri Jun 1 16:15:24 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 1133MHz ("GenuineIntel"
686-class) 1.14 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267350016 (261084K)
avail mem = 236273664 (230736K)
using 3294 buffers containing 13492224 bytes (13176K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/05/02, BIOS32 rev. 0 @
0xfd7e0, SMBIOS rev. 2.31 @ 0xff7c0
00 (48 entries)
bios0: IBM 26474MU
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd770/0x890
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xe000 0xce000/0x1000 0xcf000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 SuperSavage" rev 0x05
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
"AT&T/Lucent LTMODEM" rev 0x01 at pci2 dev 2 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x41, i82562: irq
11, address 00:d0:59:b5:d2:1
4
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA,
channel 0 configured to compa
tibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N030ATCS04-0>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8081N, 0011> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x01: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01:
irq 11, ICH3 AC97
ac97: codec id 0x43525936 (Cirrus Logic CS4299 rev 6)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Any help would be greatly appreciated. Thanks
--
Kind regards,
Jonathan
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
