Signed-off-by: Xavier Bachelot <xav...@bachelot.org>
---
src/via_outputs.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/src/via_outputs.c b/src/via_outputs.c
index 7e21e8c..04b8a83 100644
--- a/src/via_outputs.c
+++ b/src/via_outputs.c
@@ -1045,7 +1045,7 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
/* 3C5.12[4] - FPD17 pin strapping
* 0: TMDS transmitter (DVI) / capture device
* 1: Flat panel */
- if (sr12 && 0x10) {
+ if (sr12 & 0x10) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"A flat panel is connected to "
"flat panel interface.\n");
@@ -1065,7 +1065,7 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
/* 3C5.12[5] - FPD18 pin strapping
* 0: TMDS transmitter (DVI)
* 1: TV encoder */
- if (sr12 && 0x20) {
+ if (sr12 & 0x20) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"A TMDS transmitter (DVI) is connected to "
"DVI port.\n");
@@ -1079,11 +1079,11 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
* 01: NTSC
* 10: PAL-N
* 11: PAL-NC */
- if (sr13 && 0x04) {
+ if (sr13 & 0x04) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"NTSC for the TV encoder.\n");
} else {
- if (!(sr13 && 0x08)) {
+ if (!(sr13 & 0x08)) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"PAL for the TV encoder.\n");
} else {
@@ -1112,12 +1112,12 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
* DVI or TV out use
* 1: Enable DVP0 (Digital Video Port 0) for
* DVI or TV out use */
- if (sr12 && 0x40) {
+ if (sr12 & 0x40) {
/* 3C5.12[5] - DVP0D5 pin strapping
* 0: TMDS transmitter (DVI)
* 1: TV encoder */
- if (sr12 && 0x20) {
+ if (sr12 & 0x20) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"A TV encoder is detected on "
"DVP0 (Digital Video Port 0).\n");
@@ -1133,7 +1133,7 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
* 0: AGP pins are used for AGP
* 1: AGP pins are used by FPDP
* (Flat Panel Display Port) */
- if (sr13 && 0x08) {
+ if (sr13 & 0x08) {
/* 3C5.12[4] - DVP0D4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
@@ -1159,7 +1159,7 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
* 3C5.12[5] - DVP0D5 pin strapping
* 0: TMDS transmitter (DVI)
* 1: TV encoder */
- if ((!(sr12 && 0x40)) && (!(sr12 && 0x20))) {
+ if ((!(sr12 & 0x40)) && (!(sr12 & 0x20))) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"A TV encoder is connected to "
"FPDP (Flat Panel Display Port).\n");
@@ -1206,7 +1206,7 @@ viaProbePinStrapping(ScrnInfoPtr pScrn)
* 01: DVI + LVDS2
* 10: Dual LVDS Channel (High Resolution Panel)
* 11: One DVI only (decrease the clock jitter) */
- switch (sr13 && 0xC0) {
+ switch (sr13 & 0xC0) {
case 0x00:
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"LVDS1 + LVDS2 detected.\n");
--
2.5.5
_______________________________________________
Openchrome-devel mailing list
Openchrome-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/openchrome-devel
